Related Manuals for Lenovo Tab 3 Pro YT3 -X90F
Summary of Contents for Lenovo Tab 3 Pro YT3 -X90F
- Page 1 Lenovo Tab 3 Pro 10" Lenovo YT3 -X90F Lenovo YT3 -X90L Lenovo YT3 -X90X Hardware Maintenance Manual...
- Page 2 First Edition (September 2015) © Copyright Lenovo 2015. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
-
Page 3: Table Of Contents
Checking the internal battery status..21 Related service information .......23 Security ............... 23 Power management .......... 23 Activating/Deactivating the Display..23 Lenovo Tab 3 Pro 10" .........24 FRU replacement notices........25 Screw notices..........25 Removing and replacing an FRU....26 1010 Back cover..........27 1020 Battery pack......... -
Page 4: About This Manual
This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information”... -
Page 5: Safety Information
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 •... -
Page 6: General Safety
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. -
Page 7: Electrical Safety
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. - Page 8 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.
-
Page 9: Safety Inspection Guide
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. -
Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. -
Page 11: Safety Notices: Multilingual Translations
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. - Page 12 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations.
- Page 13 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
- Page 14 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
- Page 15 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing.
- Page 16 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
- Page 17 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
-
Page 18: Laser Compliance Statement
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. - Page 19 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
-
Page 20: Important Service Information
To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com/. 2. Enter a serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software. -
Page 21: Important Notice For Replacing A System Board
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. •... -
Page 22: Important Information About Replacing Rohs Compliant Frus
Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. -
Page 23: General Checkout
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: •... -
Page 24: What To Do First
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. -
Page 25: Power System Checkout
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. - Page 26 To open the Android Settings screen, do either of the following: – From the main Home screen, touch the Android Settings icon on Lenovo Launch Zone. The Android Settings screen is displayed. – Touch the application icon from the action bar and then touch Settings.
-
Page 27: Related Service Information
Related service information Related service information This chapter presents the following information: • “Security” on page 23 • “Power management” on page 23 Security Security settings include: SCREEN SECURITY, SIM CARD LOCK (3G version only), PASSWORDS, DEVICE ADMINISTRATION and CREDENTIAL STORAGE. -
Page 28: Lenovo Tab 3 Pro 10
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Lenovo Tab 3 Pro 10" This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 24 • “FRU replacement notices” on page 25 • “Removing and replacing an FRU” on page 26 •... -
Page 29: Fru Replacement Notices
This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: •... -
Page 30: Removing And Replacing An Fru
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. -
Page 31: 1010 Back Cover
Lenovo Tab 3 Pro 10" 1010 Back cover Figure 1. Removal steps of back cover Press the kickstand release button to release the kickstand, and then turn it over. Remove the screws. Step Screw (quantity) Color Torque M2.5 × 0.6 x 2.5mm (3) Silver 0.7N... - Page 32 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 1. Removal steps of back cover (continued) Remove the back cover.
-
Page 33: 1020 Battery Pack
Lenovo Tab 3 Pro 10" 1020 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Back cover” on page 27 Figure 2. - Page 34 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 2. Removal steps of battery pack (continued) Pull out the holder. Remove the battery pack from its socket.
-
Page 35: 1030 System Board
Lenovo Tab 3 Pro 10" 1030 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. - Page 36 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 3. Removal steps of system board (continued) Insert the blade tool to unsnap the back camera and hinge connectors.
- Page 37 Lenovo Tab 3 Pro 10" Figure 3. Removal steps of system board (continued) Insert the blade tool to unsnap the SIM card board connector. Insert the blade tool to unsnap the speakers connectors.
- Page 38 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 3. Removal steps of system board (continued) Insert the blade tool to unsnap the sub board connector. Insert the blade tool to unsnap the LCD board connectors.
- Page 39 Lenovo Tab 3 Pro 10" Figure 3. Removal steps of system board (continued) Insert the blade tool to unsnap the MANT antenna board connector. Release the cable of the DIV antenna sub board from its cavity.
- Page 40 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 3. Removal steps of system board (continued) Release the cables of the GPS antenna sub board from its cavity. Release the cables of the MANT antenna sub board from its cavity.
- Page 41 Lenovo Tab 3 Pro 10" Figure 3. Removal steps of system board (continued) Turn the system board over, and then insert the blade tool to unsnap the USB connector. Turn the system board over, and then insert the blade tool to unsnap the...
- Page 42 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 3. Removal steps of system board (continued) Insert the blade tool to release the motor from its cavity. Remove the screws and screws Step Screw (quantity) Color Torque M1.4 × 3.5 mm (3) Silver 0.7N...
- Page 43 Lenovo Tab 3 Pro 10" Figure 3. Removal steps of system board (continued) Lift up the system board and remove it as shown in the picture.
-
Page 44: 1040 Camera
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual 1040 Camera For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 System board” on page 31 Figure 4. Removal steps of camera Peel off the mylar with the blade tool. -
Page 45: 1050 Hinges
Lenovo Tab 3 Pro 10" 1050 Hinges For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 System board” on page 31 • “1040 Camera” on page 40 Figure 5. - Page 46 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 5. Removal steps of hinges(continued) Unsnap the sub board connector with fingers. Lock the kickstand, push the hinge out with a flat blade tool.
- Page 47 Lenovo Tab 3 Pro 10" Figure 5. Removal steps of hinges(continued) Release the cable from the hinge hole. Then release the kickstand.
-
Page 48: 1060 Speakers
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual 1060 Speakers For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 System board” on page 31 • “1040 Camera” on page 40 •... -
Page 49: 1070 Sub Board, Sim Card Board And Antenna Boards
Lenovo Tab 3 Pro 10" 1070 Sub board, SIM card board and antenna boards For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 System board” on page 31 •... - Page 50 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Figure 7. Removal steps of sub board, SIM card board and antenna boards (continued) Remove the screw, and then remove the DIV antenna board. Step Screw (quantity) Color Torque M1.4 × 1.6 mm (1) Silver 0.7N...
- Page 51 Lenovo Tab 3 Pro 10" Figure 7. Removal steps of sub board, SIM card board and antenna boards (continued) Remove the two screws, and then remove the MANT antenna board. Step Screw (quantity) Color Torque M1.4 × 1.6 mm (2) Silver 0.7N...
-
Page 52: 1080 Battery And Projector Assembly
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual 1080 Battery and Projector assembly For access, remove these FRUs in order: • “1010 Back cover” on page 27 • “1020 Battery pack” on page 29 • “1030 System board” on page 31 •... -
Page 53: Locations
On/Off button Speakers Earphone jack Projector On/Off button Kickstand Hang mode hole *Micro SIM card slot Micro SD card slot Kickstand release button Projector lens Rear camera Notes: The WLAN model (Lenovo YT3–X90F) does not have a Micro SIM card slot. -
Page 54: Parts List
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 51 • “Screws” on page 54 Notes: • Each FRU is available for all types or models, unless specific types or... -
Page 55: Overall
Lenovo Tab 3 Pro 10" Overall 10-1 15-1 16-2 16-1 20-3 20-1 20-2 23-1... - Page 56 Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Table 1. Parts list—Overall FRU no. Battery, Blade3-10A Batt&Projector Assembly CS 5B18C03279 Hinge, Blade3-10 Shaft 15.8*15.3 SSR8C02620 Metal, Blade3-10 CAM-Frame NULL 10 MG DC SM88C02573 NULL FPC, blade3 10;Earphone FPC;0.15mm;HongXin SF78C02030 FPC, Blade3-10;Earphone FPC;0.15mm;SY...
-
Page 57: Ac Adapters
Lenovo Tab 3 Pro 10" Table 1. Parts list—Overall(continued) FRU no. FPC, blade3 10;MIC FPC;0.15mm;2Layers;HongXin SF78C02033 FPC, Blade3-10;MIC FPC;0.15mm;2L;SY SF78C02510 Motor, VIB;Coin;10G20L009910E;L10;LN SM78C01382 MB, YT3-X90X MB_32G CS 5B28C03722 MB, YT3-X90L MB_32G CS 5B28C03720 MB, YT3-X90F MB_32G CS 5B28C03721 20-1 FPC, blade3 10;Sim_TFLASH FPC;0.15mm;HongXin... -
Page 58: Screws
Lenovo Tab 3 Pro 10" Hardware Maintenance Manual Screws Table 4. Parts list—Screw FRU no. Screw;Crosshead D4.0*M1.4*1.60 5M89A6N02R SCREW&*311397; IM1.4*Φ2.5*2.5 SM89A44142 Screw #2.5*M1.4*2.0(P0.3)/black+NYLOK 5M89A4675W Label Table 5. Parts list—label FRU no. Label Blade3 10A-L rating label_Row SL18C04347 Label Blade3-10A-L rating label_KR... - Page 59 The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
- Page 60 Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are either registered trademarks or trademarks of Lenovo in the United States and/or other countries: ® Lenovo ®...