Table of Contents
Advertisement
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Connect the power cord to:
the AC~MAINS jack on the back of
•
the main unit.
•
the wall outlet.
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.
Set clock
1
In standby mode, press and hold PROG/
CLOCK SET for more than two seconds
to activate the clock setting mode.
» The 12 hour or 24 hour format is
displayed.
2
Press
/
to select 12 hour or 24
hour format, and then press PROG/
CLOCK SET.
EN
9
Advertisement
Table of Contents
