Running A Product Check - Epson L210 User Manual

Light status
The power light is on or
flashing
The ink light is flashing
The power light is on or
flashing
The ink light is on
The power light is on or
flashing
The ink light is flashing
The paper light is flashing
The ink light is on
The paper light is on
The power light is flashing
The ink light is flashing
The paper light is flashing
Parent topic:
Related references
Paper Jam Problems
Where to Get Help
Related tasks
Refilling the Ink Tanks
Related topics
Loading Paper

Running a Product Check

Running a product check helps you determine if your product is operating properly.
Condition/solution
Ink level may be low. It is nearly time to reset the ink levels by refilling
the ink. You can continue printing, but you should prepare new ink
bottles. To confirm the actual ink remaining, visually check the ink levels
in the product's ink tanks.
Ink level may have reached the lower line of the ink tank and it is time to
reset the ink levels. To reset the ink levels, refill the ink.
Caution: Continued use of the product when the ink level is below the
lower line on the ink tank could damage the product.
The ink pads are near the end of their service life. Contact Epson for
support. (To continue printing, press the
color copy button.)
An error has occurred during firmware updating. Connect your product
using a USB cable and try updating the firmware again. If the error
message continues, contact Epson for support.
A fatal error has occurred. Turn the product off and then back on again.
If the error continues, check for a paper jam. If the error persists,
contact Epson for support.
Solving Problems
141
B&W copy button or the