HP V241a User Manual page 10

OSD Control
Horizontal position
Vertical position
Custom Scaling
Sharppness
Dynamic Contrast
OSD position
Horizontal OSD
Position
Vertical OSD
Position
OSD Transparency
OSD Timeout
characters (only applicable to VGA
input)
To adjust the horizontal position of
an image (only applicable to VGA
input).
To adjust the vertical position of an
image (only applicable to VGA
input).
Selects the method on how
displayed information on the
monitor will be formatted.Select
Fill to Screen – image fills the entire
screen and may look distorted or
elongated because of
non-proportional scaling of height
and width.
Fill to Aspect Ration – image is
sized to fit the screen and maintains
proportional image.
Adjusts the screen imageto look
sharper or soft. (range:1~6)
Turns Dynamic Contrast Ratio On
or Off.The factory default is Off.
Provides a menu for adjusting the
on-screen display(OSD)control.
To adjust OSD position for your
monitor.
To adjust the visual position of the
OSD menu to the right or left of the
screen. The factory default
horizontal position value is 97.
To adjust the visual position of the
OSD menu up or down the screen.
The factory default vertical position
value is 13.
To adjust the transparency to
enable transparent background
information under the OSD.
(range:0~7)
To set the OSD display time (in
seconds) after the last pressing the
9