Table of Contents
Advertisement
4.
Connect the digital cable to the DP connector of the monitor and the other end on the back
of the computer.
Note 1: Lenovo recommends that customers who require to use the DP Cable on their monitor
purchase the " Lenovo DisplayPort to DisplayPort Cable 0A36537
"www.lenovo.com/support/monitor accessories.
5.
Insert the power cord into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national
installation and or equipment regulations shall be considered. A certified power supply cord
not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be used. Alternative a flexible
cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm2 ) shall be used.
1-5
Chapter 1.
Advertisement
Table of Contents
