Basic Operation
1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
Basic operation - more you can do
Mute
Press MUTE (POWER
on the remote control) to cut the sound. To cancel it,
press again.
Changing the general settings
1 Press and hold SEL [S] (SEL on remote control) so that one of menu items
appears.
2 Press SEL [S] (SEL on remote control) and Rotate PWR. (Press VOLUME
on the remote control.) to select one of the settings specified belows.
3 Press and hold SEL [S] (SEL on remote control) to finish the setting.
DEMO OFF/ ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listen to a source.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press EQ repeatedly. The indica-
tor lights up in the following order.
POP t CLASSIC t ROCK t OFF
Adjusting the sound level
Press SEL [S] (SEL on the remote control) repeatedly to select the mode you
want to adjust from volume, balance and fader.
8
CAR CD/MP3/WMA Receiver
ON PLAYER
ON REMOTE
PWR
POWER
SRC S
S
SRC
Rotate PWR
VOLUME
Note
When EQ and XDSS+ is set to "Off", you can adjust the sound level (BAS,
TRB) settings.
XDSS+ (Extreme Dynamic Sound System)
Press XDSS. (XDSS+ : Improves the treble, bass sound.)
Checking the clock
You can see the clock pressing DISP (DISP. on the remote control)..
Setting the clock
1 Press the DISP and then, press and hold DISP for more 1 second.
2 Press the M?+ to adjust the hour.
3 Press the - ?m to adjust the minute.