Connecting To The S-Video Or Video Jack - Sharp BD-HP20H Operation Manual

Connecting to the S-video or Video Jack

You will enjoy the images through the S-video or video jack.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect an S-video cable (commercially available) or AV cable (supplied) to the S-video or video
jacks (1 and 2, or 3 and 4).
To
1
S-VIDEO
jack
S-video cable
(commercially available)
To
2
S-video
input jack
S-VIDEO
Projector
Video equipment with an S-video or video jack
After connecting
• Connect audio equipment or the audio terminals of the TV. (Pages 18-20)
This Player
(Yellow)
3
To VIDEO jack
AV cable (supplied)
or
To video
4
input jack
(Yellow)
TV
Video Connections
Blu-ray Disc
Player
NOTE
• Connect the Blu-ray disc player to LCD TV
directly. If you playback the image via VCR, the
image may deteriorate due to the copy guard
function.
• When you record the programme where
copyright is protected, the copy guard function is
activated automatically; the programme can not
be recorded correctly. Also, the playback image
via VCR may deteriorate due to this function.
However, this is not a malfunction. When you
watch the programme where copyright is
protected, we recommend that the Blu-ray disc
player be connected to LCD TV directly.
AV receiver
VCR
Connect directly
LCD TV
17