Dell Latitude E5410 Service Manual page 14

Manufacture Date
¡
Ownership Date
¡
Memory Information
l
Memory Installed
¡
Memory Available
¡
Memory Speed
¡
Memory Channel Mode
¡
Memory Technology
¡
DIMM A Size
¡
DIMM B Size
¡
Processor Information
l
Processor Type
¡
Core Count
¡
System Processor ID
¡
Information Current Clock Speed
¡
Minimum Clock Speed
¡
Maximum Clock Speed
¡
Device Information
l
Primary Hard Drive
¡
Modular Bay Device
¡
System eSATA Device
¡
Dock eSATA Device
¡
Video Controller
¡
Video BIOS Version
¡
Video Memory
¡
Panel Type
¡
Native Resolution
¡
Audio Controller
¡
Modem Controller
¡
Wi-Fi Device
¡
Cellular Device
¡
Bluetooth Device
¡
Battery
Indicates the primary battery and the media bay battery status. Also displays the type of AC adapter connected to the computer.
Information
The computer attempts to boot from the sequence of devices specified in this list:
Diskette drive
l
Internal HDD
l
USB Storage Device
l
CD/DVD/CD-RW Drive.
l
Boot
Cardbus NIC
l
Sequence
Onboard NIC
l
This list specifies the order that the BIOS searches devices when trying to find an operating system to boot. To change the boot order, select
the device to be changed in the list then click the up/down arrows or use the keyboard PgUp/PgDn keys to change the boot order of the
device. The boot devices can also be de-selected from the list using the checkboxes. This is also where the UEFI boot option can be enabled
or disabled.
Date/Time Displays current date and time settings.
Option
The System Configuration group contains options and settings related to integrated system devices. (Depending on your computer and
NOTE:
installed devices, the items listed in this section may or may not appear.)
Enables or disables the onboard LAN controller.
Integrated NIC
Default setting: Enabled w/PXE
Controls system management mechanism. The setting options are Disabled, Alert Only, and ASF 2.0.
System
Management
Default setting: ASF 2.0
This field determines how the parallel port on the docking station operates. The setting options are Disabled, AT, PS/2, and ECP.
Parallel Port
Default setting: AT
This field determines how the integrated serial port operates. The settings are Disabled, COM1, COM2, COM3, and COM4.
Serial Port
Default setting: COM1
This option configures the operating mode of the internal SATA hard drive controller. The settings are Disabled, ATA, and AHCI.
SATA Operation
Default setting: AHCI
Use the checkboxes to enable/disable the following devices:
Internal Modem
l
Modular Bay
l
Media Card, PC Card, and 1394
l
Miscellaneous External USB Port
l
Devices Microphone
l
Camera
l
eSATA Ports
l
Hard Drive FreeFall Protection
l
Default setting: All enabled.
System Configuration
Description
Video