Parts And Functions; Control Panel - Philips BDL4256ET User Manual

BDL4256ET
2.

Parts and Functions

2.1.

Control Panel

[POWER] button
1
Press to turn the display on or put the display to standby.
[
MUTE] button
2
Press to switch the audio mute ON/OFF.
[
INPUT] button
3
Press to select the input source.
[ ] button
4
Press to increase the adjustment while OSD menu is on, or increase
the audio output level while OSD menu is off.
• Used as [SET] button in the On-Screen-Display menu,
[ ] button
5
Press to decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is off.
[ ] button
6
Press to move the highlight bar up to adjust the selected item while
OSD menu is on.
[ ] button
7
Press to move the highlight bar down to adjust the selected item
while OSD menu is on.
[
MENU] button
8
Press to return to previous menu while OSD menu is on, or to
activate the OSD menu when OSD menu is off.
NOTE: "Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [ ]
9
MUTE INPUT MUTE INPUT MUTE INPUT MUTE INPUT
1 2 3 4 5 6 7
MENU MENU MENU MENU
8 8 8 8
and [ ] buttons and hold down continuously for more than
3 (three) seconds.
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
• Indicates the operating status of the display with OPS:
- Lights green when the display is on, but the OPS is off
- Lights blue when the display and the OPS is on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
OPS slot
10
Expansion slot adapter for Open Pluggable Specication (OPS) card.
4
10