LG SoundPlate lab550h Owner's Manual page 13

2. Connect all the cables of external devices you
want to use such as TV, Blu-ray disc player or
DVD player. Connect the player's LAN port to
LAN or Ethernet cable. You should also connect
the power cord supplied as an accessory.
>
Caution
y Because it is difficult to make a connection
after installing this unit, you should connect
the cables before installation.
y Be sure not to place any stress on the
connecting cables when the unit is placed
in its final location.
TV
Blu-ray disc
player, DVD
player, etc.
For more information of connections and
operations, refer to the pages below.
(O) Optical : See page 18.
(H) HDMI : See page 15 and page 18.
(P) Portable : See page 19.
(L) LAN : See page 20.
,
You can connect a USB in a way that is easier
and more convenient by using a USB extension
cable. Purchase the cable from the nearest LG
Electronic Service point.
3. Place your TV on the center of the unit.
>
y Be careful not to hide control buttons on
the top of this unit when you put your TV on
the unit.
y Position the base of your TV and the edge of
the unit as described below.
(3/8 inches)
10 mm
Power cord
4. Plug in the power cord of the unit.
Getting Started
Recommendation
Caution
(13/16 inches)
20 mm
Available zone
(Top of the unit)
30 mm
(1-3/16 inches)
13
1
(3/8 inches)
10 mm