Haier HA10TG30S User Manual page 13

FEATURES AND USE CONT.
CRISPERS AND CRISPER COVER
To remove and install the crisper: (see fig. # 6)
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper
properly in position and gently sliding it back
into place.
Fig. 6
REMOVING OR REPLACING THE
CRISPER COVER
1. Carefully grasp the crisper cover and slide out to
remove. (Fig. 7)
Fig. 7
2. To replace, slide the rear of the crisper cover
into the right and left slots above the crisper
area and gently slide back into place.
PAGE 11 • SET UP & USE