Fujitsu PRIMERGY BX920 S4 Operating Manual page 48

Starting up and operation
Control elements
On/Off button
When the server blade is switched off, it can be switched on again
by pressing the On/Off button.
When the server blade is operating, pressing the On/Off button will
switch off the server blade .
V
I
ID ID button
Lights up (blue) on the front of the server blade when the ID button
is pressed.
If the ID button is pressed for more than 5 seconds, released and
pressed again within 1 second, an NMI is issued.
LEDs on the control panel
Power indicator (three-color)
Does not light up if no line voltage is present.
Lights orange when the server is switched off but line voltage is
present.
Lights yellow to indicate a power supply error.
Lights up green when the server is switched on.
Flashes green when the server has been switched on and is in
standby mode.
48
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server blade from
the mains voltage. To disconnect it from the mains
completely, remove it from the system unit.
Operating Manual
BX920 S4