Page 2
"http://ts.fujitsu.com" For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
Page 4
Brand names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26391-K351-Z320-1-7619, edition 1...
Page 5
LIFEBOOK E752 / E782 LIFEBOOK S752 / S782 Operating Manual Innovative technology Ports and operating elements Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g: indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions...
(e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu Technology Solutions...
► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 86). Fujitsu Technology Solutions...
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu Technology Solutions...
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu Technology Solutions...
► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu Technology Solutions...
► During installation, follow the instructions on screen. If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://ts.fujitsu.com/support". Fujitsu Technology Solutions...
The indicator is illuminated: The notebook is switched on. • The indicator flashes (1 second on/1 second off): The notebook is in power saving mode. • The indicator is not illuminated: The notebook is switched off or is in Save-to-Disk mode. Fujitsu Technology Solutions...
Page 24
0% and 12% of maximum capacity. • The indicator flashes red (1 second on/1 second off). Malfunction. • The indicator is not illuminated: The first battery is not installed or is not charged. Fujitsu Technology Solutions...
Page 25
Scroll Lock indicator Indicator ScrollLock Indicator ScrollLock The indicator is illuminated: The key combination has been pressed. The effect that this key has varies between applications. Fujitsu Technology Solutions...
(e. g. from the Windows Start menu, by clicking on Start – Shut Down – OK). Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu Technology Solutions...
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu Technology Solutions...
Page 28
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Start key The Start key opens the Windows Start menu. Startkey Menu key The Menu key invokes the menu for the marked item. Fujitsu Technology Solutions...
► Press and hold the first key in the combination. ► While holding the first key down, press the other key or keys in the combination. The key combination Ctrl Alt Gr Ctrl can be used on external keyboards that do not not feature a key. Fujitsu Technology Solutions...
Page 30
With this key combination you can switch between several open applications. Alt+Tab Windows Security/Task Manager This key combination opens the Windows Security/Task Manager Ctrl window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tabular stop. Shift+Tab Backtab Fujitsu Technology Solutions...
► Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options. Application keys Applicationkeys Your notebook is equipped with five application keys. All application buttons are freely programmable, see "Programming the application keys", Page Fujitsu Technology Solutions...
You will find the Application Panel under Start - (Settings) - Control Panel - Additional Control Panel Options - Application Panel. Windows 7: You will find the Application Panel under Start symbol - Programs - Lifebook Application Panel. Fujitsu Technology Solutions...
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu Technology Solutions...
LCDscreen Notes High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
If you wish to carry out a function test with your webcam, you can use the corresponding test software available at "http://ts.fujitsu.com/support/". Fujitsu Technology Solutions...
If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery.
Page 37
► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1). ► Slide the release button in the direction of the arrow (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions...
The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Pull the unlocking lever in the direction of the arrow (1). ► Now pull the module out of the module bay (2). Fujitsu Technology Solutions...
Avoid storing a data carrier in areas subject to high temperatures or humidity. You may use both 8-cm and 12-cm data carriers in the optical drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu Technology Solutions...
► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu Technology Solutions...
Do not use any cleaning liquids! Ensure that no liquid enters the device. To avoid overheating of the device, do not remove the ventilation slot cover when the device is switched on. ► Prepare for removal, see chapter "Preparing to remove components", Page Fujitsu Technology Solutions...
Page 42
► Clean the dust chamber. ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions...
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu Technology Solutions...
The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged. Memory card Depending on the particular type used, the memory card may protrude slightly from the slot. Fujitsu Technology Solutions...
Wait for the dialogue box which tells you that it is now safe to remove the memory card. ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu Technology Solutions...
Do not use excessive force. Depending on the type, the card may protrude slightly from the slot. Please see the documentation relating to the card for driver installation instructions. Fujitsu Technology Solutions...
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu Technology Solutions...
Multifrequency (MFC) dialling: Belgium, Denmark, Germany, Finland, France, Greece, Great Britain, Holland, Ireland, Iceland, Italy, Luxembourg, Norway, Austria, Portugal, Sweden, Switzerland and Spain. Pulse dialling: Belgium, France, Holland and Italy. Also in: Poland, Slovenia, South Africa and Hungary. Fujitsu Technology Solutions...
► Connect the modem cable to the modem port of the notebook (1). Modem ► Plug the modem cable (2) into the country-specific telephone adapter (3). ► Connect the modem cable to your telephone wall socket (4). Fujitsu Technology Solutions...
► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions...
Working with the notebook Wireless LAN/ Bluetooth (device-dependent) / UMTS (device-dependent) The installation of a radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off Before switching on your device for the first time, the on/off switch for radio components must be in the "ON"...
The optional UMTS module is ready for use immediately. If you have not ordered a UMTS module, you can purchase the accessories for UMTS reception from specialised dealers or from your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS network in the documentation for the hardware used.
9 = e-SATA port 10 = USB ports Connecting the notebook to the Port Replicator If you connect the notebook to the Port Replicator during operation, problems can occur. We recommend that you switch off the notebook beforehand. Fujitsu Technology Solutions...
Page 54
► Position the notebook so that it is in line with the back edge and positioning aid of the Port Replicator (1). ► Push the notebook onto the Port Replicator in the direction of the arrow (2) until it engages. Fujitsu Technology Solutions...
If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu Technology Solutions...
► Switch the notebook off. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu Technology Solutions...
The fingerprint sensor can record an image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). Fujitsu Technology Solutions...
Utility, while the user password only provides some of the functions. You can only set a user password if a supervisor password has already been assigned. Please refer to the ""Settings in BIOS Setup Utility", Page 75 section for a description of how to call up and operate the BIOS Setup Utility. Fujitsu Technology Solutions...
Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 55), you can also prevent booting of the operating system. Operating system Fujitsu Technology Solutions...
► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook reboots and your hard disk is now protected with a password. The system will ask you to enter the password when the notebook is restarted again. Fujitsu Technology Solutions...
If you do not want to change any other settings you can exit the BIOS Setup. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the settings will be adopted. Fujitsu Technology Solutions...
► Select Enabled to activate the Virus Warning function. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the settings will be adopted. Fujitsu Technology Solutions...
In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu Technology Solutions. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.
► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu Technology Solutions...
Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices Fujitsu Technology Solutions...
► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu Technology Solutions...
The devices connected to the parallel or serial port require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. Current drivers are usually available on the Internet or will be supplied on a data medium. Fujitsu Technology Solutions...
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu Technology Solutions...
You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp), even if the notebook is switched off. Fujitsu Technology Solutions...
► Left-click on the symbol to remove hardware safely. ► Select the device you wish to shut down and remove. ► Press the "Enter" key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu Technology Solutions...
If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu Technology Solutions...
The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions...
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu Technology Solutions...
Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu Technology Solutions...
If you remove more than one component at the same time, keep the screws for the individual components separate from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. ► Tighten the screw (2). Fujitsu Technology Solutions...
► Lift the cover off the notebook (2). Removing a hard disk ► Use the pulling aid to pull the hard disk in the direction of the arrow (1) until the contacts disengage. ► Remove the hard disk from the hard disk compartment (2). Fujitsu Technology Solutions...
If you install the wrong screws, components may be damaged. ► Tighten the screws (2). ► Insert the battery (see Chapter "Installing a battery", Page 33). Fujitsu Technology Solutions...
► Install the battery again (see "Installing a battery", Page 33). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu Technology Solutions...
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu Technology Solutions...
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu Technology Solutions...
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"...
Hotline/Service Desk. When certain characters are entered on the keyboard, only numerals are written Abeepsounds everysecond Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key. activated, see "Virtual numeric keypad", Page 25 Fujitsu Technology Solutions...
► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu Technology Solutions...
► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu Technology Solutions...
► Check whether the radio connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu Technology Solutions...
► Wait 3 - 5 seconds and switch on the notebook again. If you are using an external keyboard: Keyboard error ► Check the connection and reboot the notebook. ► Make sure that no key is pressed. nn Stuck key Fujitsu Technology Solutions...
Page 87
System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu Technology Solutions...
5 °C ... 35 ℃ Operation -15 ℃ ... 60 ℃ Transportation Dimensions LIFEBOOK E752 / E782 LIFEBOOK S752 / S782 Width x depth x height 374 mm x 245 mm x 37 mm 340 mm x 245 mm x 37 mm...
The "Declarations of Conformity" for the device can be found at our Internet address under: "http://ts.fujitsu.com/ce". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Fujitsu Technology Solutions...
Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.
Page 91
Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel. • Hospital rooms, residential health care facilities, convalescent homes and prisons. • Hotel, motel or apartment lobbies. • Stores where telephones are used by patrons to order merchandise. Fujitsu Technology Solutions...
Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
Page 93
Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
In cases in which the policy regarding use of radio devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Fujitsu Technology Solutions...
Page 95
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu Technology Solutions...
Page 97
79 boards 68 LCD screen is too dark 79 cleaning 15 Life, battery 32 disposal / recycling 85 Line feed 24 energy saving 14 Loudspeakers 43 LCD screen 30 disable 26 Safety 13 enable 26 transport 14 Fujitsu Technology Solutions...
Page 98
Technical data a data carrier 36 Mains adapter 84 Removing memory notebook 84 see Adding memory 69 The radio connection to a network does Return 24 not work 81 Time not correct 78 Time, daylight savings 78 Fujitsu Technology Solutions...
Page 99
Webcam 31 Troubleshooting 77 Weight Saver Trusted Platform Module 60 Removing 34 Wireless LAN Switching off module 47 Switching on module 47 USB charging function 65 Wireless LAN: USB ports 64 safety notes 13 User password changing 55 Fujitsu Technology Solutions...