Table of Contents
Advertisement
4. Select the Playback tab.
5. If you are using the Headset profile, select Bluetooth Hands-free Audio and click the Set Default
button. If you are using the AV profile, select Stereo Audio and click the Set Default button.
6. Click OK to close the Sound window.
Note: Bluetooth is supported only on some computer models.
Option problems
Use this information to diagnose problems with Lenovo hardware options that do not have their own
troubleshooting information.
An option that was just installed does not work
Action: Verify that:
• The option is designed for your computer.
• You followed the installation instructions supplied with the option and the installation instructions provided
with your computer, and all option files (such as device drivers, if required) are installed correctly.
• You have not loosened other installed options or cables.
• If the option is an adapter, you have provided enough hardware resources for the adapter to function
correctly. See the documentation supplied with the adapter (as well as the documentation for any other
installed adapters) to determine the resources required for each adapter.
If these actions do not correct the problem, run the Lenovo Solution Center program. If you need technical
assistance, see Chapter 11 "Getting information, help, and service" on page 75.
An option that previously worked does not work now
Actions:
• Verify that all option hardware and cable connections are secure.
• If the option comes with its own test instructions, use those instructions to test the option.
• If the failing option is a SCSI option, verify that:
– The cables for all external SCSI options are connected correctly.
– The last option in each SCSI chain, or the end of the SCSI cable, is terminated correctly.
– All external SCSI options are turned on. External SCSI options must be turned on before the computer
is turned on. For more information, see your SCSI documentation.
• Verify that the option and any required device drivers are installed correctly.
If these actions do not correct the problem, run the Lenovo Solution Center program. If you need technical
assistance, see Chapter 11 "Getting information, help, and service" on page 75.
Performance and lockup problems
Poor performance and lockup problems can be a result of any of the following:
Insufficient free hard disk drive space
The Windows operating system will slow down and might produce errors if the hard disk drive gets too full.
To check the amount of free space on the Windows 7 operating system, do the following:
1. Click Start ➙ Computer.
2. Right-click your C drive entry and then click Properties. The amount of free disk space is displayed.
.
Chapter 10
Troubleshooting and diagnostics
69
Advertisement
Table of Contents
Troubleshooting
