Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG WD12490FD
Summary of Contents for LG WD12490FD
- Page 1 P/No.: MFL51768110...
- Page 2 OWNER’S MANUAL WD12490FD WD12495FD Thank you for buying a LG Fully Automatic Washing machine. Please read your owner’s manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing machine.
-
Page 3: Table Of Contents
roduct Feature Direct Drive System The advanced Brushless DC motor directly drives the drum without belt and pulley. Water Circulation Sprays detergent solution and water onto the load over and over. Clothes are soaked more quickly and thoroughly during wash cycle. The detergent suds can be removed more easily by the water shower during rinse cycle. -
Page 4: Warnings
arnings READ ALL INSTRUCTIONS BEFORE USE For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. IMPORTANT SAFETY INSTRUCTIONS WARNING : To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: •... - Page 5 arnings To minimize the risk of fire in a tumble dryer, the following should be observed: • Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer. Oil-affected items can ignite spontaneously, especially when exposed to heat sources Such as in a tumble dryer.
-
Page 6: Specification
pecification Inlet Hose Name : Front loading washing machine Power supply : 220-240V~, 50Hz Size : 635mm(W) x 720mm(D) x 925(H) Weight : 80kg Wash capacity : 9kg(2200W) Dry capacity : 5kg(2200W) Max. Watt : 2200W Spin speed : No Spin/400/800/1000/1200 Water consumption 77ℓ(8.55ℓ/kg) Permissible water pressure... -
Page 7: Installation
nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. - Page 8 nstallation Installation place requirement Level floor : Drain Hose Allowable slope under entire washer is 1° Washer Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.
- Page 9 nstallation Electrical connection 1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3.
- Page 10 nstallation Normal Tap without thread & screw type inlet hose Unscrew the fixing screw to Push the connector up till the Push the water supply hose attach the tap. rubber packing is in tight contact vertically upwards so that the with the tap.
- Page 11 nstallation This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the Plug.
- Page 12 • If possible install the washer in one of the corners of the room, where the floor is more stable. ※ ※ Insert the rubber cups to reduce vibration. ※ ※ Rubber cups ( p/no. 4620ER4002B ) can be purchased from the LG spare parts department. Important! •...
-
Page 13: Care Before Washing
are before washing Before the first washing Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues from the drum that may have been left during manufacturing. Caring before washing 1. -
Page 14: Adding Detergent
dding detergent Adding detergent and fabric softener 1. The Dispenser Drawer 3. Detergent dosage • The detergent should be used according to the instruction of the detergent manufacture. • If too much detergent is used, too many suds can occur and this will decrease the washing result or cause heavy load to the motor. - Page 15 unction Recommended courses according to the laundry type Proper Additional Maximum Program Fabric Type Temp. Option Load (Option) - Pre Wash Color fast garments (shirts, night 60˚C - Rinse+Spin dresses, pajamas...)and lightly soiled (Cold, 30˚C, Rating Cotton - Dry Only white cotton (underwear...) 40˚C, 95˚C) - Less Steam...
- Page 16 ow to use washer 2. Manual Selecting 1. Cotton automatically selected upon power on. • Press the Power( ) button to turn the washer on. • Press the Power( ) button to start. • Select the desired cycle with the •...
- Page 17 ow to use washer (6) (7) (8, 9, 10) (11) (12) (13) (1)Button: Power (5)Child lock (9)Button: Tub Clean (13)Dial: Dry (2)Dial: Program (6)Button: Rinse (10)Button: Time Delay (3)Button: Start/Pause (7)Button: Temperature (11)Button: Spin (4)Button: Option (8)Button: Intensive (12)Button: Turbo Steam Power Program 1.
- Page 18 ow to use washer Option Start/Pause • By pressing the option button, only one option function may be selected. NOTE: 1. Start Depending on the selected program cycle, not all • This Start/Pause button is used to start Options may be selectable. wash cycle or pause the wash cycle.
- Page 19 ow to use washer Rinse Child lock • By pressing the Rinse button, the Rinse type can be selected. - Normal - Rinse + If you choose to lock the buttons on the - Medic Rinse control assembly to prevent tampering, this - Normal+Hold function may be selected.
- Page 20 ow to use washer Spin Water Temperature • By pressing the Spin button, the • By pressing the Temp. spin speed can be chosen. button, the water temperature can be selected. - Cold - 30˚C / 40˚C / 60˚C / 95˚C •...
- Page 21 ow to use washer Tub Clean Time Delay Tub Clean course can be set by pressing ‘Tub Clean’ button. TUB CLEAN is special cycle to clean the Preparing washing before starting “Time Delay” inside of the washer. This cycle uses higher - Turn on the water tap.
-
Page 22: Function
ow to use washer Refresh Intensive I Refresh cycle • For slightly wrinkled clothes which have been stored for an extended time. This cycle makes wrinkled clothes easy to • When washing full load or heavily soiled iron (Do not load wet clothes). laundry, you can increase effectiveness •... - Page 23 ow to use washer NOTE The maximum drying capacity for this 1.Drying Automatic guide model is 5kg. When loading, please use the maximum drying capacity • Use your Automatic Cycles to dry most loads. indicator behind the door as shown Electronic sensors measures the temperature of the below.
- Page 24 ow to use washer 3.Completion of Drying 2. Manual Drying time guide • When drying cycle is completed, “ ” [Cool • By turning the Dry button, the drying time Down] is displayed on the Multi display. can be selected. •...
- Page 25 ow to use washer Display 3. Completion of washing • When washing cycle is completed, “ ” is displayed on the “Multi display”. 1. Special function display 4. Time left • When Child lock is selected, the “ ” lamp is on. •...
-
Page 26: Maintenance
aintenance ❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards. ❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. The water inlet filter - "... - Page 27 aintenance Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downward and by pulling it out.
- Page 28 aintenance The water circulation nozzle & steam nozzle • Clean the water circulation nozzle, if clogged. Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent.
- Page 29 roubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately. When the machine does not function properly or does not function at all, check the following points before you contact your service provider. Symptom Possible Cause Solution...
- Page 30 roubleshooting guide Symptom Possible Cause Solution Water in the washer • Drain hose is kinked or clogged. Clean and straighten the drain hose. does not drain or • The drain filter is clogged. Clean the drain filter. drains slowly. • Electrical power cord may not be Make sure plug fits tightly in wall Washer does not start plugged in or connection may be...
- Page 31 roubleshooting guide Symptom Possible Cause Solution • It takes time to balance the Wash cycle time The washing time may vary by the laundry before the spin cycle delayed amount of laundry, water pressure, water temperature and other usage conditions. If the imbalance is detected or if the suds removing program works, the wash time shall be increased.
- Page 32 roubleshooting guide Symptom Possible Cause Solution Check another tap in the house. • Water supply is not adequate in area Fully open tap. • Water supply taps are not completely open. Straighten hose(s). • Water inlet hose(s) are kinked. Check the filter of the inlet hose(s). •...
-
Page 33: Terms Of Warranty
erms of Warranty What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God. •...