Panasonic TC-P50U20P Operating Instructions Manual page 36

VIERA Link Functions
Connection
●
To use DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera
HDMI cable
●
To use Player theatre:
HDMI cable
RCA cable
∗
1: If the connected equipment has "HDAVI Control 5" function, you do not have to use the RCA cable. In this case, connect the
equipment to the TV's HDMI2 terminal via an HDMI cable.
●
This function may not work properly depending on the connected equipment.
●
For DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera with VIERA Link
function, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable.
●
For Player theatre / Blu-ray Disc theatre / Amplifier, connect to HDMI1, HDMI2, or HDMI3 terminal
via an HDMI cable and/or RCA cable for audio output from the TV.
●
Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.
Recommended Panasonic's HDMI cable part number:
• RP-CDHS15 (1.5 m)
Preparations
●
Connect the equipment supporting VIERA Link.
●
Set up the connected equipment. Read the manual of the equipment.
●
For optimal recording, the settings of the recorder might be required. For details, read the manual of
the recorder.
●
Set VIERA Link On in Setup Menu
●
Set up the TV After connection, turn the equipment on and then switch the TV on. Set the
input mode to HDMI1, HDMI2 or HDMI3 (p. 16), and make sure that an image is displayed
correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
36
DVD Player / Blu-ray Disc Player /
HD Video Camera / LUMIX Camera
with VIERA Link function
●
To use Amplifier:
Speaker system
Player theatre /
Blu-ray Disc theatre
with VIERA Link
function
∗
1
HDMI
cable
HD Video Camera /
LUMIX Camera with
VIERA Link function
• RP-CDHS30 (3.0 m)
"VIERA Link" (p. 24)
Speaker system
HDMI cable
RCA cable
∗
1
• RP-CDHS50 (5.0 m)