Electrolux EHI645BB Installation & User Manual page 8

Table of Contents

Advertisement

8
electrolux.com.au
OPERATING INSTRUCTIONS
Automatic heat up
You can get a necessary heat setting in a shorter time
if you activate the Automatic Heat Up function. This
function sets the highest heat setting for some time (see
the graphic), and then decreases to the necessary heat
setting. To start the Automatic Heat Up function for a
cooking zone:
1. Touch (
comes on in the display).
2. Immediately touch the necessary heat setting. After
3 seconds
comes on in the display. To stop the
function change the heat setting.
Switching on and off the power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 5 minutes at most. After that the induction cooking
zone automatically switches back to heat setting
switch on, touch ,
heat setting between
Power management
The power management divides the power between two
cooking zones in a pair (see the illustration). The power
function increases the power to the maximum level for one
cooking zone in the pair. The power in the second cooking
zone automatically decreases. The heat setting display for
the reduced zone changes between two levels.
comes on. To switch off, touch a
and
.
Count down timer
Use the Count Down Timer to set how long the cooking
zone operates for one cooking session. Set the Count
Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
To set the cooking zone: touch
the indicator of the required cooking zone comes on.
Starting the Count Down Timer: touch
to set the time (00 - 99 minutes). When the indicator
of the cooking zone flashes slower, the time counts
down.
Checking the remaining time: select the cooking zone
with
. The indicator of the cooking zone flashes
faster. Display shows the remaining time.
Changing the Count Down Timer: select the cooking
zone with
Stopping the timer: select the cooking zone with
Touch . The remaining time counts backwards to 00.
The indicator of the cooking zone goes out. To switch
off you can also touch
When the time elapses, the sound operates and 00
flashes. The cooking zone switches off.
Stopping the sound: touch
Count up timer
. To
Use the Count up Timer to monitor how long the cooking
zone operates.
Selection of the cooking zone (if more than 1 cooking
zone operates): touch
indicator of a necessary cooking zone comes on.
Starting the Count up Timer: touch
comes on. When the indicator of the cooking zone
flashes slower, the time counts up, display switches
between
Checking the elapsed time: select the cooking zone
with
. The indicator of the cooking zone flashes
faster. Display shows the elapsed time.
Stopping the Count up Timer: select the cooking zone
with
and touch
indicator of the cooking zone goes out.
Minute minder
You can use the timer as a Minute Minder while cooking
zones are not operating. Touch
timer to select the time. When the time elapses, the sound
operates and 00 flashes.
Stopping the sound: touch
again and again until
touch
or
.
and
at the same time.
.
again and again until the
and time elapsed (minutes).
or
to switch off the timer. The
. Touch
.
of the timer
.
of the timer
or
of the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ehi845bb

Table of Contents