Advertisement
(13) Click File to open Menu, then select "Program Settings
Alt+P" from the Menu and click.
Click File
Select "Program Settings
Alt+P" from the open Menu
(14) Input the previously noted and partially devised I/O range
into PCI/PCMCIA ATA Addresses item on the DDD
Program Options screen.
Input the original address
which exceeds the I/O range.
Input the address which takes away
1 from the original address
that exceeds the I/O range.
(e.g.) Noted I/O range
FEF0 - FEFF
Input FEF0 in the first column.
Input FEFE, which is -1 from FEFF.
Press OK button
(15) When the PCI/PCMCIA
completed, press OK button.
ATA
Addresses
input
is
(16) Finish the program either by pressing X button or press Exit
in the File menu.
(17) When the reconfirmation "Are you sure you want to end the
application?" is displayed, press Yes (Y) button to finish the
application.
2.1.6.5
Uninstall
(1) ninstall the Hitachi DDD- - SI from Add/ Remove Programs
on the Windows.
2.1.6.6
How to use DDD
NOTE:
Before starting DDD, be sure to back up users' all information
on the Microdrive.
Executing DDD may destroy all the user information, and re-
covery may become impossible.
In DDD there are two definition files (pid files) that have the
information which determines the operation of DDD.
Two pid files are exclusively prepared for JVC.
They are: FullCheckMicrodrive_jvc.pid, CleanDisk.pif
2.1.6.6.1
FullCheckMicrodrive_jvc.pid (FullCheck)
FullCheckMicrodrive_jvc.pid is the confirmation pid file to confirm
the Microdrive. (FullCheck)
It is used to confirm the drive fitness when repair or check is car-
ried out.
(1) Load the PCMCIA card adapter with the Microdrive and in-
sert it into the card slot of the PC.
* If there are two card slots, use the first slot.
CF readers/ writers using USB or drives that can be di-
rectly connected CF cards to the PC can be recognized
as drives on the PC.
However, they cannot to be recognized as media on DDD.
Therefore, please use the PCMCIA card adapter.
(2) Click My Computer to check whether the drive is newly rec-
ognized.
Usually when recognized on the PC,a new drive letter is
given.
(3) Double click the FullCheckMicrodrive_jvc.pid icon that has
been copied on the desktop to start up DDD.
(4) Take a check out at the next of SCSI.
Press X button
Press Yes (Y) button
(No.YF058)1-15
Advertisement
