Table of Contents
Advertisement
Settings
(M 9)
Profiles
(M 9-1)
Tone sound and vibration set can be customised for
each profile according to your environment.
There are 6 profiles: Normal, Meeting, Activity, Car,
Headset and Silent.
Activating a Profile
"Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding icon
described on page 20 is displayed on the stand-by
screen.
Normal:
This is the default setup (not
displayed in the stand-by screen).
Meeting:
For use when discretion is needed.
Activity:
For use in busy environments.
Car:
For use in the car (connected to a
handsfree car kit).
Headset:
For use with a headset (connected
via Bluetooth).
92
Settings
Silent:
For use when silence is needed. All
sounds are muted and you are
alerted to calls with the vibrator.
• The Auto Answer Function is disabled when "Car"
or "Headset" is selected for the profile.
Tip
• Long press R to enter Profiles settings.
Customising Profiles
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select the setting you wish to customise and change
as desired.
For details about settings, see pages 93 to 96.
4.
Press [Save] when finished.
Resetting Profile Settings
"Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code.
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 114.
4.
Press [OK], and select [Yes].
Advertisement
Table of Contents
