Panasonic TH-P58V10M Operating Instructions Manual page 47

You can watch two images at once. (p. 17)
●
The same input mode cannot be displayed at once.
●
The sound is active for main screen only in multi window.
●
You cannot change the aspect ratio in multi window.
●
This function is not available for PC or SD card.
●
Component or HDMI input is available only as the main screen.
●
Some signals are reformatted for suitable viewing on your display.
●
The display timeout for the input mode or programme position can be adjusted by "Banner Display Timeout" in
Setup Menu (p. 25).
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound
by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box, a DVD player or a
game equipment can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see "External Equipment" (p. 42).
●
HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
●
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable
(∗2).
●
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use
AV2 IN AUDIO terminal).
●
Audio settings can be made on the "HDMI1 / 4 Input" menu screen. (p. 24)
●
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
●
HDMI2/3 terminals are for digital audio signal only.
●
Use with a PC is not guaranteed. Only HDMI video formats indicated in the HDMI table (p. 48) are applicable.
●
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
●
These HDMI connectors are "type A".
●
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
●
An equipment having no digital output terminal may be connected to the input terminal of either "COMPONENT",
"S-VIDEO", or "VIDEO" to receive analogue signals.
●
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
●
For details of the applicable HDMI signals, see p. 48.
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
●
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
●
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
●
Some PC models cannot be connected to this TV.
●
When using PC, set the colour display quality of PC to the highest position.
●
For details of the applicable PC signals, see below.
●
Max. display resolution
4:3 1,440 × 1,080 pixels
Aspect
16:9
1,920 × 1,080 pixels
●
D-sub 15-pin connector signal
Pin No.
Multi Window
HDMI connection
PC connection
Signal Name Pin No.
R
G
B
NC (not connected)
GND (Ground)
Signal Name Pin No.
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Signal Name
NC (not connected)
NC (not connected)
HD
VD
NC (not connected)
47