Asus P3B E-Manual page 65

Using ASUS WiFi Projection
Using this mode, you can establish a connection between your input
device and your LED projector.
1. Connect the Wi-Fi dongle to your LED projector to launch the
Media Center
Select ASUS WiFi Projection.
2.
NOTE: If the Media Center does not automatically launch, press
then select WiFi>ASUS WiFi Projection.
Enable the WiFi connection in your input device. Select ASUS-
3.
P3B (default SSID) or the new SSID you configured for the P3B
LED projector.
NOTE: You may also refer to the steps presented onscreen.
4. Type the password on your input device as shown on the LED
projector to enable the connection.
LED projector E-Manual
65