Dear Customer, Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference.
Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • The dryer can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks...
Important instructions for safety and environment 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation. • Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician.
Important instructions for safety and environment 1.1.2 Product safety Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard. • Unwashed laundry items • Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
Page 6
Important instructions for safety and environment • You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect. Underwear that contains metal reinforcements should not be dried in the dryer.
Important instructions for safety and environment 1.2 Mounting over a washing machine • A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent. • Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx.
Important instructions for safety and environment 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation.
Take them to the packaging material collection points designated by the local authorities. Please visit the following website to get more information on the product. http://www.beko.com Dryer / User Manual 9 / 32 EN...
Important instructions for safety and environment 1.8 Technical Specifications Height (Min. / Max.) 84,6 cm / 86,6 cm* Width 59,5 cm Depth 54 cm Capacity (max.) 7 kg** Net weight (plastic front door usage) 46,5 kg Net weight (glass front door usage) 48,5 kg Voltage Rated power input...
Your Dryer 2.1 Package Contents 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* *It can be supplied with your machine depending on its model. Dryer / User Manual 11 / 32 EN...
Installation Before the calling the nearest Authorized Service for the on the power Do not place the dryer installation of the dryer, ensure that electrical installation cable. and water drain is appropriate referring to the user's 3.2 Removing the transportation manual.(See 3.3 Connecting to the drain and 3.5 safety assembly Electrical connection) If they are not suitable, contact...
Installation 3.5 Electrical connection For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety) 3.6 Transportation of the dryer Unplug the dryer before transporting it. Drain all water that has remained in the dryer. If direct water drain connection is made, then remove the hose connections.
Installation 3.8 Changing the illumination lamp In case an illumination lamp is used in your laundry dryer To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service. The lamp(s) used in this appliance is not suitable for household room illumination.
Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme. LAUNDRY DRYING SYMBOLS Drying Suitable for...
Preparation • Clean the filter drawer regularly either when the Following weights are given as examples. Filter Drawer Cleaning warning symbol appears or Approximate weights after every 5 drying cycles. (See 6. Maintenance Laundry (g)* and cleaning) Cotton quit covers (double) 1500 •...
Operating the product 5.3 Preparing the machine 5.5 Main programs Plug in the machine The main programs are given below based on fabric Place laundry inside the machine. type. Press the On/Off button. • Cotton When your machine turns on for the first time, Dry durable laundry with this program.
Page 19
Operating the product Very little dampness might remain on the shirts after the program. It is recommended that you do not leave the shirts in the drying machine. • Delicates You can dry your delicates suitable for drying or laundry that is recommended to hand wash (silk blouses, thin underwear etc.) in low temperature.
Page 20
Operating the product 5.7 Program selection and consumption table Spin speed in washing Approximate amount Programs Capacity (kg) Drying time (minutes) machine (rpm) of remaining humidity Cottons / Coloreds Extra dry 1000 % 60 Cupboard dry 1000 % 60 Iron dry 1000 % 60 Shirt...
Operating the product 5.8 Auxiliary functions Loading door open Start/Pause led blinks when the loading door of the Sound warning cancel drying machine is open. Drying machine makes sound warnings when the program is completed. If you don’t want sound 5.10 End duration notifications, press the “Sound Notification”...
Operating the product Canceling the end duration function 5.13 Changing the program after it is If you want to cancel the end duration setting started countdown and start the program right away: After the machine starts running, you can change Cancel the program by pressing the On/Off button.
Operating the product 5.14 Canceling the program If you want to cancel the program and end the drying operation for any reason after the machine starts running, press the On/Off button. As it will be extremely hot inside the machine when you cancel the program while the machine is in operation;...
Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter.
Maintenance and cleaning • Drain the water in the tank. Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! • If there is lint accumulation in the funnel of the water tank, clean it under running water. •...
Page 26
Maintenance and cleaning • Pull out the filter drawer. • Wash the filter drawer sponge by hand to remove the fiber and lint on the surface. After washing the sponge, squeeze it by hand and remove the excess water. Well-dry the sponge before storing it. It is not necessary to clean the sponge if lint and fiber accumulation on it is not significant.
Maintenance and cleaning • Close the kick plate cover. Drying without the filter drawer sponge in place will damage the machine! A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption. 6.5 Cleaning the evaporator Clean the lint accumulated on the fins of the evaporator located behind the filter drawer with a vacuum cleaner.
Troubleshooting Drying process takes too much time. • Pores of the lint filter are clogged. >>> Wash the lint filter with warm water. • Filter drawer is clogged. Clean the sponge and the filter cloth in the filter drawer. >>> Remove the objects (if any) • Ventilation grids on the front side of the machine are blocked. >>> that block ventilation in front of the ventilation grids. •...
Page 29
Troubleshooting End symbol is on. • Programme is over. Turn off the dryer and take out the laundry. Lint Filter Cleaning symbol is on. Lint filter is not cleaned. >>> Clean the lint filter. • Lint Filter Cleaning symbol is flashing. • Filter housing is clogged with lints. >>> Clean the lint filter housing. • A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water. • Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer. Water leaks from the loading door •...
Electrical Connection Make sure that you have an earthed power outlet Important socket rated at 13 amps (minimum). Fitting a different plug Attention! As the colours of the wires in the mains lead of this appliance may not correspond with the If you use your dryer as built-in, the socket must coloured markings identifying the terminals on be reachable after installation, or a separate...