1030 Speaker Assembly - Lenovo ThinkPad S1 Yoga Hardware Maintenance Manual

Applying labels to the base cover assembly
The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those
labels when you replace the base cover assembly. For the labels that are not shipped with the new base
cover assembly, peel them off from the old base cover assembly, and adhere them to the new one.
The following illustration shows the location of each label.
When you replace the base cover assembly, apply the serial number label
If the Genuine Microsoft label
attached to the customer, or provide a letter to the customer stating what the label was originally on the
computer and what the part number, serial number, and product key were on the label.
The following labels need to be peeled off from the old base cover assembly, and then adhere to the new
base cover assembly.
2
CECP label
3
GEO label
4
FCC label
5
NFC label

1030 Speaker assembly

For access, remove this FRU:
• "1020 Base cover assembly" on page 58
60
Hardware Maintenance Manual
1 2
9 8 7 6
6
is attached to a part that is replaced, return the old part with the label
3 4
1 .
7
Hard disk drive warranty label
8
Asset tag label
9
Israel Homo label, Brazil Anatel label, Indonesia postel
label, or MY SIRIM label
5