Dhcp Server - D-Link DAP-1155 User Manual

Section 3 - Configuration
The DHCP server settings defines the range of the IP address that can be assigned to stations in the network. If needed or
required in the network, the DAP-1155 is capable of acting as a DHCP server.
Enable DHCP server : Check to allow the DAP-1155 to function as a

DHCP server.

DHCP IP Address Input the IP address available for assignment on
Range : your network.
Always Broadcast : Check to keep broadcast.
Gateway : Enter the IP address of the gateway on the
network.
WINS : Enter the IP address of the WINS on the network.
DNS : Enter the IP address of the DNS on the network.
DHCP Lease Time : The lease time is the period of time before the
DHCP server will assign new IP addresses.
D-Link DAP-1155 User Manual
DHCP Server
27