Table of Contents
Advertisement
To install the iSCSI option ROM:
1.
Locate the BootIMG.FLB and Bootutil.exe files in the iSCSI folder on your SDVD.
2.
Copy the BootIMG.FLB and Bootutil.exe files to a bootable USB storage device.
3.
Enter DOS environment.
The utility must run under pure DOS environment. It cannot run in a DOS box on Windows
system. You should boot from a DOS floppy without any device drivers
4.
Within the DOS environment, enter the directory with the BootIMG.FLB and Bootutil.
exe files.
5.
Install the iSCSI option ROM:
bootutil.exe -nic=1 -up=iscsi -quiet
Port 1 and Port 2 share the same flash.
6.
Restart the system.
D:\>bootutil.exe -nic=1 -up=iscsi -quiet
Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.6.39.1
Copyright(c) 2003-2017 Intel Corporation
Programming flash on port 1 with flash firmware image
/
Flash update successful
Port Network Address Location Series
==== =============== ======== ======= === ============================= =======
1
00E018122208
2
00E018122209
D:\>
ASUS MCI-10G/82599-2S
WOL Flash Firmware
1:00.0 10GbE
N/A UEFI,PXE Enabled
1:00.1 10GbE
N/A UEFI,PXE Enabled
Version
2.3.58
2.3.58
2-7
Advertisement
Table of Contents
