Table of Contents
Advertisement
DVG-7111S User's Manual
3-2-1-6 Digit Map
Digit Map supports multiple dial plans which help users to arrange least cost route. Each Proxy Server
has individual dial plan which combines the original feature of Digit Map and Speed Dial. You can use
"?" or "%" in the column of Scan Code and VoIP Dial-out. "?" represents a single digit, and "%"
represents a wildcard. The function of the signs is to mapping the numbers between the number
received from user and the replaced or modified number for actual dial out. With this function, users can
easily add certain leading digits to replace a full set of numbers. There are 50 sets of leading digit
entries to choose voice routing interface.
ADVANCED → VoIP → Digit Map
Enable Pound Key ' # ' Function: Check the box to treat ' # ' as a digit and send out with other
numbers when dialing. If you un-check the box and ' # ' is pressed after dialing, it will speed up the
phone number detection of the VoIP TA.
Default Call Route: Select Auto(VoIP first), VoIP, PSTN or Deny as the default call route for all calls.
Auto (VoIP first): The call route is VoIP first, and the next is PSTN.
VoIP: The call route is VoIP only.
PSTN: The call route is PSTN only.
Deny: All calls will be denied.
Default VoIP Route Profile: Enter the Profile ID (ranging from 1-10) for the Default VoIP routing.
ADVANCED → VoIP → Digit Map
Scan Code: Enter the digits for the VoIP TA to scan while user is dialing.
VoIP Dial-out: Enter the actual dialing number rule for the VoIP TA to call through the Internet.
PSTN Dial-out: Enter the dialed number rule for the VoIP TA to call through PSTN.
User Dial Length: Enter the total number of digits that user dialed.
Route: Select Auto(VoIP first), VoIP, PSTN or Deny for this entry.
VoIP Route Profile: Choose the proper Profile ID and click VoIP Route Profile to set the priority of
VoIP Route Profile.
D-Link Systems, Inc.
ADVANCED
39
Advertisement
Table of Contents
