Table of Contents
Advertisement
Reinstall TV
You can redo the full TV installation. The TV is
completely reinstalled.
To redo the full TV installation...
1 - Press , select All Settings and press OK.
2 - Select General Settings and select Reinstall
TV.
3 - Follow the instructions on screen. The installation
may take a few minutes.
14.5
Clock, Region and Language
Menu Language
To change the language of the TV menus and
messages...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press (right) to enter the menu.
3 - Select Languages > Menu Language and
press OK.
4 - Select the language you need.
5 - Press (left) repeatedly if necessary, to close
the menu.
Clock
Date and Time
Automatic
To know what time it is, press HOME. The Home
Menu always shows what time it is.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
When you record programs scheduled in the TV
Guide, we recommend that you do not change the
time and date manually. In some countries, for some
network operators, the Clock setting is hidden to
avoid an incorrect clock setting.
To correct the TV clock automatically...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press (right) to enter the menu.
3 - Select Clock > Auto Clock Mode, and
select Automatic.
4 - Press (left) repeatedly if necessary, to close
the menu.
Manual
To set the TV clock manually...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press (right) to enter the menu.
3 - Select Clock > Auto Clock Mode, and
select Manual.
4 - Select Date and Time to adjust.
5 - Press (left) repeatedly if necessary, to close
the menu.
Time Zone
To set the time zone...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press (right) to enter the menu.
3 - Select Clock > Auto Clock Mode, and select
Manual.
4 - Select Time Zone, and press OK.
5 - Select the appropriate setting.
6 - Press (left) repeatedly if necessary, to close
the menu.
Sleep Timer
With the Sleep Timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer...
1 - Press , select All Settings and press OK.
2 - Select Region and Language > Clock, and
press OK.
3 - Select Sleep Timer and press (right). With
the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
4 - Press (left) repeatedly if necessary, to close
the menu.
14.6
Universal Access
Switch On
With Universal Access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal Access during the
installation, you can still switch it on in the Universal
49
Advertisement
Table of Contents
