Tv Menu Operation; Picture Menu - Sharp LC-32CFE6351K User Manual

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode
- Choose from the following presets:
Dynamic Recommended settings for fast moving pictures
Standard Standard settings
Mild Set to be lighter in colour and less bright
Personal Lets you manually alter all the settings
Economy Power saving mode which reduces the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode, the TV will switch itself to
Standby mode after 3-5 hours in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode to another setting to de-activate
this function)
You can make the following adjustments in
• Contrast - Switch the balance between black and white.
• Brightness - Increase or decrease the brightness of the picture.
• Colour - Increases the colour from black and white.
• Tint - Lets you increase or decrease the level of tint within the picture
(only available for NTSC input signal).
• Sharpness - Increase or decrease the sharpness of the picture.
Backlight adjusting
- Adjust the screen's brightness by increasing/decreasing the panel's backlighting.
Colour Temperature
Choose from the following presets:
Normal Default settings
Warm Increases red within the picture
Cold Increases blue within the picture
Personal Lets you manually alter the settings
Red
- Adjust red tone of the picture.
Green
- Adjust green tone of the picture.
Blue
- Adjust blue tone of the picture.
Gamma
- Adjust the tones between the bright and dark parts of the picture. Choose one of the
following presets: low, middle and high.
Personal
mode:
buttons.
17 17