[ Eco Operation Indicator Lamp ] /Door Alarm/Locking The Control Panel - Hitachi R-SF57BMS How To Use Manual

[ eco OPERATION INDICATOR LAMP ] /DOOR ALARM/LOCKING THE CONTROL PANEL

● Always confi gure the settings with all the doors closed.
Caution
When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
Notice
● If [ " eco " Operation indicator lamp] isn ' t illuminated, check the following things.
・ Is the [ " eco " Operation indicator lamp] set as Off? → Perform the above-mentioned procedure for how to return.
・ Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the
compressor operates at a high speed and this indicator lamp is not lit. → Open/close the door quickly or minimize
the number of opening/closing the door.
・ When the refrigerator is operated with 急冷凍 (Quick Freezing) , 急冷藏 (Quick Cooling) or 急速製冰 (Quick Ice Making)
enabled, → It will be illuminated after the quick cooling functions fi nish and the operation of the refrigerator gets stable.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the [ " eco " Operation indicator lamp] is illuminated.
[ " eco " operation indicator lamp] can be turned off when you feel uneasy at night, etc.
■ How to turn off the
indicator lamp
Push and hold the
for three seconds with all the
doors closed until the [ " eco "
Operation indicator lamp]
blinks.
The [ " eco " Operation
indicator lamp] is unlit.
When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.
Duration when door is open
30 seconds ※
1 minute
2 minutes
3 minutes
■ When you want to stop the alarm
Push and hold the
for three seconds with all the
doors closed until one beep
sounds.
When the setting has been
completed, the indicator
lamp is restored to the
original state.
Notice
● When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm
indicating cleaning of the ice-making tray does sound.
● The Door Alarm is enabled when shipped.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the
Door Alarm sounds.
When this indicator lamp
This can prevent erroneous operation of the Control Panel or misuse by children.
■ Locking
Push and hold
the button for
approximately three
seconds until one
beep sounds.
is lit to indicate
that the lock has been
completed.
Notice
54
● After locking or unlocking, confi rm the temperature setting for the refrigerator compartment.
[ " eco " Operation indicator lamp]
button
The indicator
lamp blinks
Push this button and hold it for 3 seconds
Alarm sound
3 long beeps
3 long beeps
5 long beeps
It keeps continuously sounding.
The Door Alarm can be stopped.
button
Indicator
lamp is ON
Push this button and hold it for 3 seconds
Locking the Control Panel
(Lock on the panel for operation) is illuminated, any other button will not be actuated by pushing it.
Indicator
lamp is ON
Push this button and hold it for 3 seconds
Pg.36
[ eco Operation indicator lamp]
■ How to restore the setting
Push and hold the
three seconds with all the doors
About closed until the [ " eco " Operation
3 seconds
indicator lamp] becomes lit.
The [ " eco " Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
Door Alarm
※ From 30 seconds onwards, the Door Alarm sounds
Control Panel
only when the energy saving mode is set.
Does not blink
The Refrigerator Compartment, Ice Compartment and
Flashing
Lower Freezer have the Door Alarm function (, but the
Flashing
Upper Freezer and Vegetable Compartment doesn t).
Flashing
■ When you want to sound the alarm again
Push and hold the
for three seconds with all the
doors closed until two beeps
sound.
About
3 seconds
When the setting has been
completed, the indicator
lamp is restored to the
original state.
■ Unlocking
Push and hold
the button for
approximately three
seconds until two
About
3 seconds
beeps sound.
is lit to indicate
that the lock has been
released.
button for
Indicator
lamp is ON
Push this button and hold it for 3 seconds
button
Indicator
lamp is ON
Push this button and hold it for 3 seconds
Indicator
lamp is OFF
Push this button and hold it for 3 seconds
About
3 seconds
About
3 seconds
About
3 seconds