Basic Operation; Checking Part Names And Functions; Remote Control; Plugging And Unplugging A Usb Storage Device - Pioneer MVH-AV179 Owner's Manual

Basic operation

Checking part names and
functions
1
2
3
4
5
6
7
1 LCD screen
2 RESET  Resetting the microprocessor on page 4
button
3 Volume (+/–) button
4 MUTE Press to switch the mute setting to on or off.
button
5 Press to switch the display between the top
button
menu screen and the current source screen.
6 Press to turn the display on or off.
DISP
button
7 Performs manual seek tuning, fast forward,
TRK (
reverse and track search controls.
/ )
button

Remote control

1 2 3
8
7
4
9
5
6
1 Volume (+/–)
6
2 MODE Press to turn the display on or off.
3 SRC Press to cycle through all the available sources.
Press and hold to turn the source off.
4 Not used.
TOP
MENU
5 MENU Not used.
6 Thumb Not used.
pad
7 MUTE Press to switch the mute setting to on or off.
8 AUDIO Not used.
SUBTITLE
ANGLE
9 BAND Selects the tuner band when tuner is selected
as a source.
Cancels the control mode of functions.
10 Return Returns to the specified point and begins
playback from there.
11 Pauses or resumes playback.
For audio: Press and hold to perform fast
or
reverse or fast forward.
For video: Press to perform fast reverse or fast
forward.
Press to return to the previous track (chapter)
or
or go to the next track (chapter).
Stops playback.
If you resume playback, playback will start from
the point where you stopped. Touch the key
again to stop playback completely.
12 FOLDER/P. Selects the next or previous folder.
Recalls radio station frequencies assigned to
CH
preset channel keys.
Plugging and unplugging a USB
storage device
a
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
b
p A USB cable is required for connection.
c
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1
2
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
After a short pause, the splash screen comes on for a few
seconds.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touch .
The top menu screen appears.