Zanussi ZOP37901 User Manual page 22

What to do if...
Problem
You cannot activate or operate
the oven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quickly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "C3".
The display shows "F102".
22
Possible cause
The oven is not connected to an
electrical supply or it is connec-
ted incorrectly.
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The automatic switch-off is acti-
vated.
The Child Lock is on.
The fuse is released.
The lamp is defective.
The temperature is too low or too
high.
You left the dish in the oven for
too long.
The cleaning function does not
operate. You did not fully close
the door, or the door lock is de-
fective.
• You did not fully close the
door.
• The door lock is defective.
Remedy
Check if the oven is correctly
connected to the electrical sup-
ply (refer to the connection dia-
gram if available).
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Refer to "Automatic switch-off".
Refer to "Using the Child Lock".
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Replace the lamp.
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Fully close the door.
• Fully close the door.
• Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
• If the display shows "F102"
again, contact the Customer
Care Department.
www.zanussi.com