Displaying The Dvi Input Signal Information - Panasonic AV-HS410E Operating Instructions Manual

2. Input/output signal settings

2-1-11. Displaying the DVI input signal information

These are used to display the information concerning the DVI-D input signal images.
The information cannot be changed.
1 On the Input sub menu, use [F2] to select the input to be set using the Select item.
 Refer to "2-1. Input signal settings".
2 Use [F1] to display the DVI Status sub menu.
Size This indicates the pixel count of the images.
Dot Clock This indicates the dot clock frequency of the
images.
H-Frequency This indicates the horizontal frequency of the
images.
V-Frequency
This indicates the vertical frequency of the
images.
The formats supported are listed below.
<DVI-D formats supported>
Input video signal
XGA 1024  768
WXGA
1280  768
SXGA 1280  1024
WSXGA+ 1680  1050
UXGA 1600  1200
WUXGA 1920  1200
1080/50p
1920  1080
1080/59.94p 1920  1080
1080/50i 1920  1080
1080/59.94i 1920  1080
720/50p 1280  720
720/59.94p 1280  720
p  If the format of the input signals is not supported, it may not be possible to import the signals properly, and a black image or
disturbed image may appear.
Dot clock frequency
(MHz)
Digital 65.0
Digital 79.5
Digital 108.0
Digital 146.2
Digital 162.0
Digital 154.0
Digital (RGB) 148.5
Digital (RGB) 148.5/1.001
Digital (RGB) 74.25
Digital (RGB) 74.25/1.001
Digital (RGB) 74.25
Digital (RGB) 74.25/1.001
85
Frequency
Horizontal Vertical
(kHz) (Hz)
48.36 60.00
47.78 59.87
63.98 60.02
65.29 59.95
75.00 60.00
74.04 59.95
56.25 50.00
67.50/1.001 60.00/1.001
28.13 50.00
33.72 60.00/1.001
37.50 50.00
44.96 60.00/1.001