Running A Product Check - Epson L365 User Manual

Light status
The paper light is on
The WiFi light is flashing
orange
The ink light is flashing
The paper light is flashing
The WiFi light is flashing
green and orange
The power light is flashing
The ink light is flashing
The paper light is flashing
The WiFi light is flashing
green and orange
Parent topic:
Related references
Where to Get Help
Paper Jam Problems
Related tasks
Refilling the Ink Tanks
Related topics
Loading Paper

Running a Product Check

Running a product check helps you determine if your product is operating properly.
1. Press the
2. Disconnect any interface cables connected to your product.
3. Load plain paper in the product.
Condition/solution
No paper is loaded or multiple sheets fed at one time. Load paper in the
product, and press the
button to clear the error.
A WiFi error has occurred. Press the WiFi button to clear the error and
try again.
An error has occurred during firmware updating. Connect your product
using a USB cable and try updating the firmware again. If the error
continues, contact Epson for support.
Open the scanner unit and remove any paper or protective materials
inside the printer. Turn the product off and then back on again.
Solving Problems
power button to turn the product off.
B&W copy button or the
149
color copy