Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 5452 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Place the palm rest at the edge of the table with the speakers facing away
from the edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on
the display hinges.
3 Replace the screws that secure the display hinges to the palm-rest
assembly.
4 Route the antenna cables through its routing guides on the palm-rest
assembly.
5 Route the display cable through its routing guides on the palm-rest
assembly.

Post-requisites

1 Replace the system
2 Replace the I/O
3 Replace the heat-sink
4 Replace the computer
5 Replace the keyboard.
6 Replace the wireless
7 Follow the procedure from step 5 to step 7 in
8 Replace the memory
78
computer. After working inside your
board.
board.
assembly.
base.
card.
modules.
After working inside your
"Replacing the hard drive".