RT-AC1900P AC adapter Network cable (RJ-45) Quick Start Guide NOTE: If any of the items is damaged or missing, contact your retailer. A quick look at your RT-AC1900P 1900P 9 10 1) LAN 1~4 LED 6) Power LED 11) USB 3.0/2.0 ports...
Page 4
• T o safely remove the USB disk, launch the web GUI (http://192.168.1.1), then in the Network Map page's upper right corner, click the USB icon and click Eject USB 3.0 / USB 2.0. • I ncorrect removal of the USB disk may cause data corruption. • F or the list of file system and hard disk partitions that the wireless router supports, visit http://event.asus.com/networks/disksupport • F or the list of printers that the wireless router supports, visit http://event.asus.com/networks/printersupport...
For the optimal wireless transmission between the wireless router and connect- ed wireless devices, ensure that you: • Place the wireless router in a centralized area for a maximum wireless coverage for the network devices. • Keep the wireless router away from metal obstructions and away from direct sunlight. • Keep the wireless router away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal interference or loss. • To ensure the best wireless signal, orient the three detachable antennas as shown in the drawing below. • Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates. 90 ° 45 ° 45 ° 1900P...
Page 6
Disconnect the network cable from your cable/ADSL modem. c. Reboot your computer (recommended). WARNING! Before disconnecting the wires/cables, ensure that your cable/ADSL modem has been turned off for at least two minutes. If your modem has a backup battery, remove it as well. 3. Set up your wireless environment. RT-AC1900P Wall Power Outlet Power Computer...
Page 7
Using the bundled network cable, connect your computer to your wireless router’s LAN port. Ensure that the WAN and LAN LEDs are blinking. NOTE: You can also set up RT-AC1900P using a mobile device such as smartphone or tablet PC. To do this, go to Setup your router using a mobile device for details.
Page 8
2. Launch your web browser such as Internet Explorer, Firefox, Google Chrome, or Safari. 1900P NOTE: If QIS does not launch automatically, enter http://192.168.1.1 or http://router.asus.com in the address bar and refresh the browser again. 3. Assign your router login name and password and click Next. You will need this login name and password to log into RT-AC1900P to view or change the router settings.
Page 9
Setup of router (RT-AC68U) administrator password Login name: Login password: 4. The wireless router’s Quick Internet Setup (QIS) feature automatically detects if your ISP connection type is Dynamic IP, PPPoE, PPTP, L2TP, and Static IP. Please obtain the necessary information about your Internet connection type from your Internet Service Provider (ISP). If your connection type is Dynamic IP (DHCP), QIS wizard will automatically direct you to the next step.
Page 10
5. Assign the network name (SSID) and security key for your 2.4GHz and 5GHz wireless connection. Click Apply when done. 6. Your Internet and wireless settings are displayed. Click Next to continue. 7. Read the wireless network connection tutorial. When done, click Finish. NOTES: • You can assign a network name with up to 32 characters.
Page 11
Setting up your router using a mobile device (optional) You can also use your mobile device such as a smartphone or a tablet PC to set up RT-AC1900P through QIS wizard. The QIS wizard will automatically switch to the mobile version if you use a smartphone or a tablet PC to launch it. To set up your router using a mobile device: 1. Turn on RT-AC1900P. 2. Enable Wi-Fi function of your mobile device. 3. Search for the SSID ASUS, which is the default SSID of your RT-AC1900P wireless network.
Page 12
6. The QIS feature automatically detects if your ISP connection type is Dynam- ic IP, PPPoE, PPTP, L2TP, and Static IP. Enter the necessary information that your Internet Service Provider (ISP) has provided. If your connection type is Dynamic IP (DHCP), QIS wizard will automatically direct you to the next step. NOTE: If your connection type is Static IP, choose Static IP and click Next. Enter the IP address, subnet mask, default gateway and DNS serv- er information provided by your ISP. Click Next to proceed.
RT-AC1900P’s network without entering password. To connect to the wireless network through WPS: 1. Press the WPS button at the back of RT-AC1900P. Refer to the section A quick look at your RT-AC1900P for the location of the WPS button).
Page 14
Google Chrome. NOTE: Use the search bar on the bottom of the interface to get more infor- mation from ASUS technical support site http://support.asus.com. IMPORTANT: • For more details on using your router's Web GUI, refer to the user manual.
Page 15
1. Ensure that your router’s firmware version is the latest one and supports AiCloud. 2. Download AiCloud app from Google Play or App Store. 3. Install your USB storage device to your router. Refer to section A quick look at your RT-AC1900P for the location of the USB ports. 4. Connect your iOS or Android devices to the router through Wi-Fi. The Ai- Cloud app will automatically guide you through the setup process. 5. You can now access, stream and share to all files in your USB storage. Search ASUS AiCloud for more information. Watch tutorial videos for step-by-step...
After following the steps, I still cannot access the wireless router’s web graphics user interface (web GUI) to configure the wireless router settings. Ensure that your PC's proxy settings are disabled and your PC'S IP address is obtained from the DHCP server automatically. for details on disabling the proxy settings, visit the ASUS Support site at http://support.asus.com. For details on using the DHCP server to obtain IP addresses automatically, refer to your Windows® or Mac operating system's help feature. The client cannot establish a wireless connection with the router.
Page 17
Network name or encryption keys are forgotten. • Try setting up the wired connection and configuring the wireless encryption again. • Press the Reset button of the wireless router for more than five seconds. • Factory default settings: User name / Password: IP address: SSID: admin / admin 192.168.1.1 ASUS Where can I find more information about the wireless router? • Technical Support site: https://www.asus.com/support • Customer Hotline: Refer to the Support Hotline in this Quick Start Guide...
Page 21
2. 準備調製解調器 a. 拔掉 AC 電源適配器的電源並斷開與有線 / ADSL 調製解調器的連接。 b. 拔掉您有線 / ADSL 調製解調器的網線。 c. 重啟您的電腦(建議執行)。 警告!請在斷開電源線或數據線之前,確認您的有線 / ADSL 已關 閉超過兩分鐘。若您的調製解調器有備用電池,請一併移除。 3. 設置無線環境 RT-AC1900P Wall Power Outlet Power Computer...
Page 22
將無線路由器的 AC 適配器插入電源輸入口(DC-IN)並插上電源。 b. 用另一根網線將您的調製解調器連接至無線路由器的 WAN 接口。 c. 將調製解調器的 AC 適配器插入電源輸入口(DC-IN)並插上電源。 d. 使用附贈的網線將您的電腦連接至您的無線路由器的 LAN 接口。 注意:您也可以使用移動設備來設置 RT-AC1900P,如,智能手機 或平板電腦。要進行此操作,參考“使用移動設備設置路由器”部 分的說明。 4. 關閉電腦中的某些設置 a. 關閉代理服務器。 b. 設置 TCP/IP 自動取得 IP 地址。 c. 關閉撥號連接。 注意:更多信息請參閱“常見問題解答(FAQ)”。...
Page 23
使用網絡設置嚮導(QIS)設置路由器 按照以下步驟進行設置: 1. 按下路由器後側的電源按鈕。確定電源指示燈、LAN 指示燈以及 WAN 指 示燈亮起。 2. 開啟一個網絡瀏覽器,如 Internet Explorer、Firefox、Safari 或 Google Chrome。 1900P 注意:若網絡設置嚮導(QIS)未能自動開啟,請在您的網路瀏覽器 中輸入 http://192.168.1.1 或 http://router.asus.com 並刷新頁面。 3. 為路由器設置登錄名與密碼,然後點擊【Next】。您需要使用此名稱與密 碼來登錄 RT-AC1900P 查看並更改路由器設置。記錄下路由器登錄名稱 與密碼以備日後使用。...
Page 34
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials.
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is mini- mized.
Page 36
Informations concernant l’exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans l ASUS est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil de sans l ASUS de façon à minimiser les contacts humains lors du fonctionnement normal.
Page 38
Area Country / Region Hotline Number Service Hours Australia 1300-278788 09:00-18:00 Mon-Fri New Zealand 0800-278788 09:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri 0800-1232787 09:00-17:00 Sat-Sun Japan 09:00-18:00 Mon-Fri 0081-473905630 (Non-Toll Free) 09:00-17:00 Sat-Sun Korea 0082-215666868 09:30-17:00 Mon-Fri Thailand 0066-24011717 09:00-18:00 Mon-Fri 1800-8525201 0065-64157917 11:00-19:00 Mon-Fri Asia-Pacific Singapore...
Page 39
Montenegro 00382-20608251 09:00-17:00 Mon-Fri Serbia 00381-112070677 09:00-17:00 Mon-Fri Slovenia 00368-59045400 08:00-16:00 Mon-Fri 00368-59045401 Estonia 00372-6671796 09:00-18:00 Mon-Fri Latvia 00371-67408838 09:00-18:00 Mon-Fri Lithuania-Kaunas 00370-37329000 09:00-18:00 Mon-Fri Lithuania-Vilnius 00370-522101160 09:00-18:00 Mon-Fri NOTE: For more information, visit the ASUS support site at: http://support.asus.com...