Kenwood HCG700 Instructions For Use - Installation Advice page 16

Built-in cooking hob
Table of Contents

Advertisement

APPLYING THE SEALS
Turn the cooker top upside down.
Spread the longer seal "A" around the
left, rear and right sides as shown in
figure 4.4a.
With a cutter or a scissors cut the
excess seal "C" and retain it for next
use (figure 4.4b).
Fig. 4.4a
seal A
Fig. 4.4e
seal B
16
Fig. 4.4b
seal C
seal A
Spread the seal "B" around the left,
front and right edges of the cooker top
as shown in figure 4.4c.
Spread the seal "C" along the rear
edge of the cooker top as shown in fig-
ure 4.4d. Making sure that the begin-
ning and the end overlap at the seal
"B" (see figure 4.4e).
Fig. 4.4c
seal B
seal C
seal C
Fig. 4.4d

Advertisement

Table of Contents
loading

Table of Contents