Product Setup - D-Link GO-DSL-N150 Quick Installation Manual

PRODUCT
SET-UP
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure GO-DSL-N150 manually (without the set-up CD) connect your computer to the
GO-DSL-N150 using the ethernet cable provided. Then connect the power cable on the GO-
DSL-N150. The power light will display as solid green.
Then simply open a browser window and enter the IP address in the browser address field:
GO-DSL-N150
IP ADDRESS: http://192.168.1.1
USERNAME: admin
PASSWORD: admin
5