Panasonic SA-HT730P Service Manual page 2

SA-HT730P / SA-HT730PC / SA-HT730PX
(1) DVD-RAM (DVD-VR compatible, JPEG formatted discs)
(2) DVD-Audio
(3) DVD-Video
(4) DVD-R, DVD-RW (DVD-Video compatible)
+R, +RW (Video compatible)
(5) CD-Audio (CD-DA)
(6) Video CD
(7) SVCD (Conforming to IEC62107)
(8) CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG
formatted discs)
(9) MP3/WMA
lCompatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 320 kbps
lMaximum number of recognizable audio and picture contents
and groups:
4000 audio and picture contents and 400 groups
(10) JPEG
lExif Ver 2.1 JPEG Baseline files
lPicture resolution: between 320 x 240 and 6144 x 4096
pixels (sub sampling is 4:2:2 or 4:2:0)
lMaximum number of recognizable audio and picture contents
and groups:
4000 audio and picture contents and 400 groups
(11) HighMAT Level 2 (Audio and lmage)
Pick up:
Source of light beam:
Wavelength:
lCD:
lDVD:
Laser power:
P area:
PC/ PX areas:
Audio output (DISC):
Number of channels:
lVideo section
Video system:
Signal system:
Composite video output:
Output level:
Terminal:
S-video output:
Y output level:
CONTENTS
1 Use of Active Subwoofer
1.1. Checking Player when Active Subwoofer is not used
Semiconductor Laser
785nm
662nm
CLASS IIa/ CLASS I
CLASS 2/ CLASS 3a
5.1 ch (FL, FR, C, SL, SR,
SW)
NTSC
1 Vp-p (75 Ω)
Pin jack (1 system)
1 Vp-p (75 Ω)
Page
4
4
C output level:
Terminal
Component video output (480P/480I):
Y output level:
P output level:
B
P output level:
R
Terminal:
Power consumption in standby mode:
P/PC areas:
PX area:
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
2 Safety Precautions
2.1. GENERAL GUIDELINES
2
NTSC; 0.286 Vp-p (75 Ω)
S terminal (1 system)
1 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
Pin jack (Y: green, P : blue,
B
P : red) (1 system)
R
approx 0.5W
approx 0.9W
Page
5
5