Electrolux EWF 14012 User Manual page 16

16 www.electrolux.com
Step 4 - Starting a program
5.2 Interruption Of A Program
- To pause press Start/ Pause. The
indicator will start flashing.
- Press the Start/Pause again. The
program will continue.
5.3 Changing A Program
Changing a running program is possible
only by switching off the appliance.
- Press the 'On/Off' button to cancel the
program and to turn off the appliance.
- If you wish to carry out the
"Prewash" phase, pour it into
the compartment marked
-
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the "MAX" mark in the
drawer).
If you use thick softeners it
is recommended to dilute
with water.
To start a program, press the
Start/Pause ( ) touchpad, the
corresponding pilot light will
stop flashing and a default
program duration will be
displayed on the screen.
-
Close the drawer gently.
.
After washing cycle finish,
residues of detergent,
softener and water may
remain in the dispenser. It
is recommended to clean
the dispenser regularly to
remove any residue.
After approx. 15 minutes from the
start of a program:
- The appliance will automatically
adjust the selected program
duration according to the type
and size of the load.
-
The display will show adjusted
program duration.
- Press the 'On/Off' button again to
start the appliance.
Now, you can set a new washing
program.
The appliance will not drain
the water.
5.4 Changing The Options
It is possible to change only some
option after the program has
started.