Turning On The Lte With Lte Button; Turning Off The Lte Connection; Viewing The Lte Status - Motorola APX 7000 User Manual

Turning On the LTE with LTE Button

Press and hold the preprogrammed LTE button.
The display shows LTE ON to indicate radio is
initating the LTE connection.
The display shows LTE CNTD once the radio is
connected.
If there is an encryption error, the display shows LTE
SVC alternating with ERROR.
If there are no LTE networks available, the display
shows No LTE alternating with SERVICE.
Note: It is advisable to turn off the LTE if the radio
prompts LTE service error or No LTE service.
For the error no LTE service available, turn on the
LTE after you moved to another site to check the
availablity.

Turning Off the LTE Connection

To extend the radio battery life, disable the LTE
Connection when radio is out of LTE coverage.
80
Press and hold the preprogrammed LTE button.
English
reverts back to using LTE data
transmission network.
The display shows LTE OFF to indicate the LTE
connection is off.

Viewing the LTE Status

Here are the definitions of the temporary statuses of
the LTE which are shown on the radio top display.
Status Derivation and definition
shown
LTE NOT
LTE not ready
alternating
with READY
LTE CNTG
LTE
connecting
LTE CNTD
LTE
connected
LTE
LTE
alternating
disconnected
with
DISCNCTD
The LTE is busy.
The radio is trying
to connect to an
LTE modem.
LTE communication
is currently
connected.
LTE
communication is