Cruise Control
1. Accelerate to the speed you would like to retain.
2. Push the cruise control switch On (Fig. 2).
3. To decelerate, push the cruise control switch Off or
slowly apply the brake pedal.
Note: The battery must be fully charged for the cruise
control to operate reliably.
Positioning the Seat
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are
most comfortable.
1. Raise the seat and loosen the adjustment knobs (Fig. 3).
2. Move the seat to the desired position and tighten the
adjustment knobs.
Figure 3
1. Adjustment knobs
Headlights
The headlights are an integral function of the ignition
switch. Turn the ignition key clockwise to the Lights
position.
Using the Blade Control (PTO)
The blade control (PTO) engages and disengages power to
the blade(s).
Engaging the Blade(s)
1. Depress the brake pedal to stop the machine.
2. Pull the blade control (PTO) out to Engaged (Fig. 4).
Note: The PTO light on the dash will turn on when the
PTO is engaged (Fig. 5).
1. Blade control (PTO)
2. Engaged
Disengaging the Blade(s)
1. Depress the brake pedal to stop the machine.
1
2. Push the PTO in to Disengaged (Fig. 4).
Grass Collector Warning Light
When the grass collector is full and needs to be emptied,
the warning light will come on (Fig. 5) and a buzzer will
m–4841
sound.
1. Grass collector warning
light
Important
clogged, disengage the PTO when the warning light and
buzzer are activated.
13
2
1
Figure 4
3. Disengaged
2
1
Figure 5
2. Parking brake light
3. PTO light
To prevent the discharge tunnel from getting
3
3