DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
You can specify the following parameters:
Parameter
Name
Interface
IP address
Mask
Protocol
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
Figure 53. The page for adding a rule for remote management.
A name for the rule for easier identification. You can specify any
name.
A physical interface through which the web-based interface of the
router is accessed.
A host or a subnet to which the rule is applied.
The mask of the subnet.
The protocol available for remote management of the router.
Description
Page 72 of 110
Configuring via Web-based Interface