Toro power max 828 OE Operator's Manual page 26

Problem
Discharge chute either does not lock into
place or does not move
Snowthrower does not properly clear the
snow off the surface
Possible Cause
7. The auger/impeller drive belt is worn
or broken.
1. The discharge chute latch is not
properly adjusted.
1. The skids and/or scraper are not
properly adjusted.
2. The pressure in the tires is not equal.
26
Corrective Action
7. Replace the auger/impeller drive belt;
refer to www.Toro.com for servicing
information or take the snowthrower to
an Authorized Service Dealer.
1. Adjust the discharge chute latch.
1. Adjust the skids and/or the scraper.
2. Check and adjust the pressure in one
or both tires.