Husqvarna 524LK Operator's Manual page 14

Oil level
The machine must be switched off and placed on a flat
surface when you check the oil level.
Unscrew the oil cap, clean the dipstick located on the cap
and insert the cap again without screwing it down. Check
the oil level on the dipstick.
When the oil level is low, top up using engine oil to the
edge of the oil refill hole.
Only use recommended engine oil.
14 – English
FUEL HANDLING
Fueling
!
Always use a fuel container with an anti-spill valve.
Clean around the fuel cap. Clean the fuel and oil tank
regularly. The fuel filter should be changed at least once
a year. Contamination in the tanks causes malfunction.
Always move the machine about 3 metres from the
refuelling position before starting.
WARNING! Taking the following
precautions, will lessen the risk of fire:
Do not smoke or place hot objects near
fuel.
Always shut off the engine before
refueling.
Always stop the engine and let it cool for
a few minutes before refueling.
Always mix the gasoline and oil in a
clean container intended for fuel. Mix and
pour fuel outdoors, where there are no
sparks or flames.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refueling.
Always move the machine away from the
refueling area and source before
starting.
1158418-49 Rev. 1 2016-08-11