Configuration; Accessing The Web Configuration Utility - D-Link DCS-936L User Manual

Section 3 - Configuration

Configuration

Accessing the Web Configuration Utility

After completing setup through the mydlink Lite mobile app or Zero Configuration Setup,
you are ready to use your camera. The camera's built-in Web configuration utility is designed
to allow you to easily access and configure your DCS-936L.
To access your camera's configuration utility, use a web browser to log in to the
mydlink.com website, select your camera from your device list, then click on the Settings
tab for your camera.
Use the User name admin and the password you created during the setup process. If you did
not create a password, the default password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on
a closed network, the default IP is 192.168.0.20.
After logging in to your camera, the Live Video page will open.
D-Link DCS-936L User Manual 17