Page 1
[eHELP] (Built-in Operating Instructions). How to use [eHELP] (p. 20) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use.
Contents Be Sure to Read Important Notice··················································· 3 For information about the trademarks, refer to [eHELP] (Support > Licence). Safety Precautions ··············································· 4 Quick Start Guide Accessories ························································ 7 The illustration for TX-58DXW804 is used in this manual unless otherwise mentioned. Connections ························································...
Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf.
Do not use an unapproved pedestal / mounting Consequently, the mains plug should be easily equipment. Be sure to ask your local Panasonic accessible at all times. dealer to perform the setup or installation of approved wall-hanging brackets.
Page 5
If this occurs, contact your radio frequency ISM band (Bluetooth ® ). To avoid nearest Panasonic dealer immediately. malfunctions or slow response caused by radio wave During setup, make sure that all screws are securely interference, keep the TV and Touch Pad Controller tightened.
Page 6
Moving the TV / speaker Battery for the Remote Control / Touch Pad Controller Caution Caution Before moving the TV, disconnect all cables. Incorrect installation may cause battery leakage, At least two people are required to move the TV. corrosion and explosion. Support the TV as shown below to prevent injury that may be caused by the tipping, falling of TV or finger Replace only with the same or equivalent type.
(p. 16) N2QAYA000097 Declaration of Conformity (DoC) “Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.” If you want to get a copy of the original DoC of this TV,...
Page 8
Optional accessories Do not allow the speaker to make contact with the TV 3D Eyewear and pedestal. If you need 3D Eyewear, please purchase Panasonic optional accessories. Use Panasonic 3D Eyewear supporting Bluetooth wireless technology for active shutter 3D. For information about 3D Eyewear (English only): http://panasonic.net/viera/support...
Connections Terminals External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. Check the terminal type and cable plugs are correct for connection. Use a fully wired HDMI compliant cable.
Page 10
Mains lead Basic connections Speaker (supplied) AC 220-240 V 50 / 60 Hz Mains lead Aerial Cable RF cable Terrestrial aerial For DVB-C, DVB-T, Analogue Satellite connection For DVB-S The speaker can be exclusively used for this TV. To loosen / remove the cable tie (Bundled the speaker Dual Tuner (DiSEqC) cable) (p.
Page 11
Single Tuner DVB-via-IP client connection This TV has DVB-via-IP client function and can connect to DVB-via-IP server or SAT>IP compatible servers to receive broadcast streaming. It is recommended to connect to DVB-via-IP server with a LAN cable. Wired connection Satellite cable Cable Satellite dish To ensure your satellite dish is correctly installed,...
Page 12
AV devices Network A broadband network environment is required to be able DVD Recorder / VCR to use internet services. If you do not have any broadband network services, please consult your retailer for assistance. Prepare the internet environment for wired connection or wireless connection.
Page 13
[HDMI Auto Setting] (Setup Menu) Amplifier (listening with external speakers) Reproduces the image more precisely with the Use HDMI2 to connect the TV to an amplifier which expanded colour gamut when connecting the 4K has ARC (Audio Return Channel) function. compatible equipment.
Page 14
To remove from the TV: snaps Keep pushing both side snaps Fixing the cables using the net tube CI module USB HDD (for recording) Use USB 1 port for connecting the USB HDD. For details, refer to [eHELP] (Recording). VIERA Link Use HDMI1 - 4 for VIERA Link connection.
Page 15
Fixing the cables using the cable tie Attaching the cable cover / terminal cover Do not apply load to the cable cover / terminal cover. Be careful not to nip the cables / net tube between the TV and the cable cover / terminal cover. When using USB 2 port, USB 3 port or HDMI4 terminal, you cannot attach the cable cover.
6 OK Identifying Controls Confirms selections and choices. Press after selecting channel positions to quickly change channel. Displays channel list. Remote Control 7 [Option Menu] Easy optional setting for viewing, sound, etc. 8 APPS Displays [Apps] (applications list). 9 Sound Mute On / Off 10 Teletext button 11 Volume Up / Down 12 Numeric buttons...
Page 17
Installing / Removing batteries Pull open Hook Close Note the correct polarity (+ or -) ]: Standby On / Off switch Touch Pad Controller 2 Volume Up / Down 3 On-screen remote control The Touch Pad Controller is designed for convenient Press to display the remote control GUI (Graphical and intuitive operation, especially with [Home Screen] or User Interface).
Page 18
Installing / Removing batteries Indicator / Control panel When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight which button has been pressed. Slide open Rear side of the TV Close 1 Remote control signal receiver Do not place any objects between the TV remote...
Select [Home] First time Auto Setup Select [Home] for use in a home viewing environment. [Shop] is for shop display. To change the viewing environment later on, the set When the TV is turned on for the first time, it will will need to have all settings initialised by accessing automatically search for available TV channels and give Shipping Condition.
Watching TV How to Use eHELP [eHELP] is the detailed operating instructions built into Turn power on the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. (TV) Display [eHELP] (Remote Control) Mains power On / Off switch should be on.
There are differences in the viewing range of the 3D quality and alternately played back. Eyewear among individuals. To view the 3D images Use Panasonic 3D Eyewear supporting Bluetooth wireless technology for active shutter 3D. Playing back 3D-compatible Blu-ray disc (Frame Sequential format) Connect the 3D-compatible player via a fully wired HDMI compliant cable.
Adjust using the slide bar How to Use Menu Sharpness Moved Functions change store Various menu items allow you to make settings for the picture, sound, and other functions. Go to the next screen Child Lock Display the menu access Displays the functions that can be set (varies according to the input signal).
Changing Picture [User]: Adjusts the sounds manually using the equaliser to suit your favourite sound quality. and Sound settings The following items can be adjusted and stored for each mode. [Bass] / [Treble] / [Surround] / [Bass Boost] Picture For the User mode, [Equaliser] is available in the Sound Menu instead of [Bass] and [Treble].
Retuning from Setup Select [Auto Setup] select Menu access Automatically retunes the channels received in the area. Set [Search Mode] / [Scan Mode] This function is available if channel tuning is already performed. After settings, select [Start scan]. Only the selected mode is retuned. All the previous tuning settings are erased.
Tuning and Editing DVB-via-IP Channels Select DVB-via-IP You can retune channels, create your favourite channel Display the menu and select [Setup] lists, skip unwanted channels, etc. For details, refer to [eHELP] (Watching > Tuning and select editing channels). Setup access Select the mode Select [DVB-via-IP Tuning Menu] select...
Multi Window Child Lock Displays two windows at once for viewing the TV You can lock specific channels / AV input terminals to programmes or external input (AV / COMPONENT / restrict access to them. HDMI) as shown below (example). When the locked channel / input is selected, a message For details, refer to [eHELP] (Functions >...
TV’s remote control. How to change the code Each Panasonic product has its own remote control code. Change the code according to the product for operation. Press and hold Standby On / Off switch...
Viewing Teletext Select the page Coloured buttons Teletext services are the text information provided by the (Corresponds to the colour broadcaster. bar) The features may vary depending on the broadcaster. Watch TV and teletext in two windows at For details, refer to [eHELP] (Watching > Teletext). once TOP mode (For TOP text broadcasting) Operations can be made only in teletext screen.
[Timer Programming] Using TV Guide Select the forthcoming programme select TV Guide - Electronic Programme Guide (EPG) provides access an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next To check / change / cancel a timer event (p.
USB HDD Recording Select the USB HDD for recording and start setup USB Device Setup You can record the digital TV programmes to the Product Name connected USB HDD and enjoy playing back in various USB Drive A USB Flash Disk ways.
This recording may not start if another recording is in Timer Programming progress, TV signal condition is bad or there are no images displayed. To operate [REW LIVE TV] This function allows you to select programmes that you want to record to the USB HDD. To pause For details, refer to [eHELP] (Recording >...
: Overlapped timer events Using Media Player [Signal Supported Recording] (if available) This function is Timer Programming which is controlled by information from the TV Guide; if Media Player allows you to enjoy photo, video or music programme start and end times are changed recorded on the USB Flash Memory / USB HDD / by the broadcaster, the timer event will follow network device, and content recorded with this TV to the...
Using Home Network Select the device (USB Flash Memory / USB HDD / network device) select DLNA ® access This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard When a confirmation screen about the network device that makes DLNA Certified digital electronics easier and is displayed, enter User / Password to access.
Page 34
Wired connection (For DLNA and internet select service) access Be sure to remove the cable cover / terminal cover before connecting or disconnecting cables. Select the media server select access Select the file select access Depending on the condition of media server, you may need to select the folder before selecting the file.
No sound is produced FAQs Check connection of the speaker. (p. 10) Is “Sound mute” active? (p. 16) Is the volume set to the minimum? Before requesting service or assistance, please follow these simple guides to solve the problem. Ensure that [Speaker Selection] (Sound Menu) is set to [TV].
Maintenance Mains plug Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may cause fire or electrical shock. First, remove the mains plug from the mains socket. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints.
4K, 3D (3D content of 4K format is not supported.), Content Type, Deep Colour, x.v.Colour™ Model No. HDMI2: 4K, 3D (3D content of 4K format is not : TX-50DXW804 50-inch model supported.), Content Type, Audio Return : TX-58DXW804 58-inch model Channel, Deep Colour, x.v.Colour™...
Page 38
PAL D, K Note SECAM D, K Touch Pad Controller uses Bluetooth wireless technology. VHF R1 - R2 Design and Specifications are subject to change VHF R3 - R5 without notice. Mass and Dimensions shown are VHF R6 - R12 approximate.
Page 39
2 Attach the wall-hanging brackets to the speaker When using the wall-hanging bracket Professional installation is required. The installation should never be done by any other than a qualified installation specialist. Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Page 40
4 Fit the speaker securely onto the screws Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. Holes for wall-hanging bracket installation Rear of the TV 400 mm 200 mm Move the speaker so that the screw is in this position.
Page 41
Removing the pedestal 3 Lift up the TV from the pedestal as shown Keep all the removed parts for assembling the Tilt the TV backwards pedestal back to the TV. Lift up the TV Do not lay down the TV with the pedestal on a desk, etc.
Page 42
5 Remove the assembly screw Assembling the pedestal 6 Remove the bracket Be sure to assemble the pedestal in the following way when you stop using the wall-hanging bracket. 1 Put the TV onto a work table with the screen panel down on a clean and soft cloth (blanket, etc.) 2 Use the assembly screw to fasten the bracket...