Bosch wfd2473 Operating Instructions And Installation page 16

Wash the laundry
Selecting a wash programme
Basic wash programmes
See the programme table below
«Cottons+Linens»
Heavily soiled whites, 90 ºC
Intensive wash programme for hard-wearing
cotton or linen items.
«Cotton+Prewash» 60 ºC
Whites and coloureds, hard-wearing
fabrics and colourfast, 60 ºC, with
Prewash.
For highly soiled laundry
Coloureds, 30, 40, 60 ºC
Hard-wearing fabrics.
«Easy-Care»
Delicates, 30, 40, 60 ºC (synthetics)
For washing delicate cottons, synthetic or
mixed fibre fabrics.
«Delicates/Woollens»
Very delicate items, 30 ºC
(gentle wash programme)
For washing delicate cottons, synthetic or
mixed fibre fabrics, or curtains. These
programmes have no spin cycle between
rinsing cycles.
Woollens, 30 ºC, cold
For machine washable woollens or wool
mixtures.
Additional programmes
Rinse
Rinse cycle with low-energy spin. Can also be
used for delicate items.
Spin
Extra spin cycle, washing or rinsing water is
pumped out before spinning the laundry.
Drain
Pumps out the rinse water if «Rinse Hold» has
been selected. For careful washing of delicate
items.
16 en
Additional functions
6
Reduces the spin speed.
Rinse hold
The laundry remains in the water after the final.
Starting a programme
m Turn the programme selector to the
required wash programme.
m The «Wash/Ready» indicator light flashes.
m Selecting the required spin speed.
Ensures careful washing by automatically
limiting the maximum spin speed in the
«Easy-care (synthetics)»,
«Delicates/Woollens» wash programmes.
m Set to the required temperature using the
temperature selector.
m Press the additional function button(s) to
activate them. The corresponding indicator
light comes on.
m Press the «Start» button
The «Wash/Ready » indicator light comes
on. The wash programme starts.
The «Wash/Ready» indicator light remains
lit throughout the wash programme
selected.
m The «Rinse» indicator light comes on during
the «Rinse» programme.
Modifying a selected programme
If you have selected and started an incorrect
wash programme it can be corrected in the
following way:
m Turn the programme selector to «Off».
m Set the programme selector to the position
for the required programme. The
«Wash/Ready» indicator light flashes.
m Press the «Start» button
The «Wash/Ready» indicator light comes
on. The newly selected programme starts.