Pairing The 3D Glasses With The Projector - Epson PowerLite Home Cinema 3900 User Manual

6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector.
Note: If you change the video source or you are not within range of your projector, the glasses enter
standby mode and the status light flashes green. Slide the power switch on the glasses to the Off
position and then back to the On position to resume 3D viewing.

Pairing the 3D Glasses with the Projector

Charging the 3D Glasses
3D Viewing Range
Parent topic:
Related references
Input Signal Settings - Signal Menu
Pairing the 3D Glasses with the Projector
Pair the glasses with the projector to establish communication between them for 3D viewing.
1. Turn on the projector.
2. Set the image source to HDMI on the projector.
3. Project a 3D image.
4. Slide the power switch on the 3D glasses to the On position.
Using Basic Projector Features
57