Checking After Installation - Panasonic NA-140XR1 Operating & Installation Instructions Manual

Checking after Installation

Appliance parts checklist
Anchor rods 
●
Have you removed all 2 anchor
rods and fitted cover caps?
(P.38, 39)
Anchor rods (2)
Do not remove the fastener of the
drain hose in the upper left.
Adjustable feet
□
●
Are they stable and securely
tightened? (P.39)
●
Is the appliance level? (P.39)
Installation place
●
Is the appliance on a flat, stable
surface?
●
Does it run without vibrating?
(P.39)
42
Mains plug
□
●
Is the appliance plugged into an
AC 220 - 240 V household mains
socket? (see back cover)
Water supply hose
Mains plug
Drain hose
Adjustable feet (4)
Water supply hose
●
Is the water supply hose properly
connected? Is it free from leaks?
(P.41)
Drain hose
□
□
●
Is the drain hose properly
connected? Does it drain
normally? (P.41)
6
1
Turn on the tap.
2
Close the door without any
laundry in the drum.
3
Switch on the appliance.
4
Select the "Quick 50"
programme.
5
Select M.
6
Start operation.
7
Switch the appliance off
and on.
8
Select
□
9
is displayed.
10
Press while
displayed to start test
run.
is displayed.
Operation finishes after about
3 minutes.
Test run
8 5 10 9 4 7
Water leaks
●
Check the appliance and hose
joints for leaks. (P.40)
Abnormal noise
●
Make sure the appliance is
level. (P.39)
Error display
Unable to drain (P.36)
.
Unable to supply water
(P.36)
Press for about
●
After resolving an error, open
5 seconds.
and close the door and press
"Start/Pause" to resume the test.
is
7
3, 7
□
□
□
43