Sound Adjustment - Toshiba 32PB10E Owner's Manual

Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press s or r to
select 3D Colour Management.
2
Press v or w, then press v or w to select
On.
3
Press Q, then press s or r to select Base
Colour Adjustment.
4
Press Q, then press s or r to select an
item you want to adjust.
Base Colour Adjustment
Hue
Red 0
0
Green
Blue
0
Yellow 0
0
Magenta
Cyan
0
5
Press w, then press v or w to select Hue,
Saturation or Brightness.
6
Press s or r to adjust the settings as
required.
Red
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu,
press s or r to select Reset.
2
Press Q.
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press s or r to
select Active Backlight Control.
2
Press v or w to select On or Off.
Activating Auto Brightness Sensor
When the Auto Brightness Sensor is activated,
it will automatically optimise the backlighting
levels to suit ambient light conditions.
1
From the PICTURE menu, press s or r to
select Auto Brightness Sensor.
18
Using the TV's features
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
Reset
Hue Saturation Brightness
0 0 0
2
Press v or w to select On or Off.

Sound adjustment

Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programmes depending on the
broadcast signal.
1
Press MENU, and then press v or w to
display the SOUND menu.
2
Press s or r to select MTS, and then press
v or w to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode
to Mono.
Noise will be reduced and reception may
improve.
Note:
If you experience noise with a particular
programme on whose channel reception is
usually good, try setting MTS mode to Auto,
then switch g to e Mono (monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound
selected, whenever bilingual programmes are
received.
1
Press MENU, and then press v or w to
display the SOUND menu.
2
Press s or r to select Dual, and then press
v or w to select Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the
Dual menu is not selectable.
• The Dual menu setting status remains even if
the TV is turned off.
Selecting the stereo programmes
1
When a stereo programme is received, d
Stereo appears.
10
ABCD
2
Press g to select the stereo/monaural
mode. d Stereo and e Mono appear
cyclically on the screen.
Stereo